C8051F341-GQ Silicon Laboratories Inc, C8051F341-GQ Datasheet - Page 172

• Manufacturer Part Number: C8051F341-GQ
• Description: IC 8051 MCU FLASH 32K 48TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F34xr

Specifications of C8051F341-GQ

• Program Memory Type: FLASH
• Program Memory Size: 32KB (32K x 8)
• Package / Case: 48-TQFP, 48-VQFP
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 48MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 40
• Ram Size: 2.25K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 20x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: C8051F3x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 3.25 KB
• Interface Type: I2C/SMBus/SPI/UART/USB
• Maximum Clock Frequency: 48 MHz
• Number Of Programmable I/os: 40
• Number Of Timers: 4
• Operating Supply Voltage: 2.7 V to 5.25 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: KSK-SL-F34X, KSK-SL-TOOLSTICK, PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F340DK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 17-ch x 10-bit
• No. Of I/o's: 40
• Ram Memory Size: 2304Byte
• Cpu Speed: 48MHz
• No. Of Timers: 4
• Rohs Compliant: Yes
• Package: 48TQFP
• Device Core: 8051
• Family Name: C8051F34x
• Maximum Speed: 48 MHz
• Data Rom Size: 128 B
• A/d Bit Size: 10 bit
• A/d Channels Available: 17
• Height: 1 mm
• Length: 7 mm
• Supply Voltage (max): 3.6 V
• Supply Voltage (min): 2.7 V
• Width: 7 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1748 - ADAPTER TOOLSTICK FOR C8051F34X770-1006 - ISP 4PORT FOR SILABS C8051F MCU336-1452 - ADAPTER PROGRAM TOOLSTICK F340
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1299

C8051F340/1/2/3/4/5/6/7/8/9/A/B/C/D
16.8. Interrupts
The read-only USB0 interrupt flags are located in the USB registers shown in USB Register
Definition 16.11 through USB Register Definition 16.13. The associated interrupt enable bits are located in
the USB registers shown in USB Register Definition 16.14 through USB Register Definition 16.16. A USB0
interrupt is generated when any of the USB interrupt flags is set to ‘1’. The USB0 interrupt is enabled via
the EIE1 SFR (see
Important Note: Reading a USB interrupt flag register resets all flags in that register to ‘0’.
172
Bits7-0:
Bits7-3:
Bits2-0:
Bit7
Bit7
R
R
-
USB Register Definition 16.10. FRAMEH: USB0 Frame Number High
USB Register Definition 16.9. FRAMEL: USB0 Frame Number Low
Frame Number Low
This register contains bits7-0 of the last received frame number.
Unused. Read = 0. Write = don’t care.
Frame Number High Byte
This register contains bits10-8 of the last received frame number.
Bit6
Bit6
R
R
-
Section “9.3. Interrupt Handler” on page 88
Bit5
Bit5
R
R
-
Frame Number Low
Bit4
Bit4
R
R
-
Rev. 1.3
Bit3
Bit3
R
R
-
Bit2
Bit2
R
R
Frame Number High
).
Bit1
Bit1
R
R
Bit0
Bit0
R
R
USB Address:
USB Address:
00000000
00000000
Reset Value
Reset Value
0x0C
0x0D