ATTINY84-20SSUR Atmel, ATTINY84-20SSUR Datasheet - Page 65

• Manufacturer Part Number: ATTINY84-20SSUR
• Description: MCU AVR 8KB FLASH 10MHZ 14SOIC
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY84-20SSUR

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 20MHz
• Connectivity: USI
• Peripherals: Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT
• Number Of I /o: 12
• Program Memory Size: 8KB (4K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 512 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

10.2.2
8006K–AVR–10/10
Alternate Functions of Port B
The Port B pins with alternate function are shown in
Table 10-7.
• Port B, Bit 0 – XTAL1/PCINT8
• Port B, Bit 1 – XTAL2/PCINT9
• Port B, Bit 2 – INT0/OC0A/CKOUT/PCINT10
• XTAL1: Chip Clock Oscillator pin 1. Used for all chip clock sources except internal
• PCINT8: Pin Change Interrupt source 8. The PB0 pin can serve as an external interrupt
• CLKI: Clock Input from an external clock source, see
• XTAL2: Chip Clock Oscillator pin 2. Used as clock pin for all chip clock sources except
• PCINT9: Pin Change Interrupt source 9. The PB1 pin can serve as an external interrupt
• INT0: External Interrupt Request 0.
• OC0A: Output Compare Match output: The PB2 pin can serve as an external output for the
• CKOUT - System Clock Output: The system clock can be output on the PB2 pin. The system
• PCINT10: Pin Change Interrupt source 10. The PB2 pin can serve as an external interrupt
calibrateble RC oscillator. When used as a clock pin, the pin can not be used as an I/O pin.
When using internal calibratable RC Oscillator as a chip clock source, PB0 serves as an
ordinary I/O pin.
source for pin change interrupt 1.
internal calibrateble RC Oscillator and external clock. When used as a clock pin, the pin can
not be used as an I/O pin. When using internal calibratable RC Oscillator or External clock as
a Chip clock sources, PB1 serves as an ordinary I/O pin.
source for pin change interrupt 1.
Timer/Counter0 Compare Match A. The PB2 pin has to be configured as an output (DDB2
set (one)) to serve this function. The OC0A pin is also the output pin for the PWM mode timer
function.
clock will be output if the CKOUT Fuse is programmed, regardless of the PORTB2 and DDB2
settings. It will also be output during reset.
source for pin change interrupt 1.
Port Pin
PB0
PB1
PB3
PB2
Port B Pins Alternate Functions
Alternate Function
XTAL1: Crystal Oscillator Input
PCINT8: Pin Change Interrupt 1, Source 8
CLKI:
XTAL2: Crystal Oscillator Output
PCINT9: Pin Change Interrupt 1, Source 9
INT0:
OC0A: Timer/Counter0 Compare Match A output
CKOUT: System Clock Output
PCINT10:Pin Change Interrupt 1, Source 10
RESET: Reset pin
dW:
PCINT11:Pin Change Interrupt 1, Source 11.
External Clock Input
External Interrupt 0 Input
debugWire I/O
Table
“External Clock” on page
10-7.
ATtiny24/44/84
26.
65