PIC16F1934-E/ML Microchip Technology, PIC16F1934-E/ML Datasheet - Page 25

• Manufacturer Part Number: PIC16F1934-E/ML
• Description: IC PIC MCU FLASH 256KX7 44-QFN
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1934-E/ML

• Program Memory Type: FLASH
• Program Memory Size: 7KB (4K x 14)
• Package / Case: 44-QFN
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Processor Series: PIC16F
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 256 B
• Interface Type: EUSART/MI2C/SPI
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 36
• Number Of Timers: 5
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 14-ch x 10-bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

4.3.11
The Bulk Erase Program Memory command performs
two different functions dependent on the current state
of the address.
A Bulk Erase Program Memory command should not
be issued when the address is greater than 8008h.
FIGURE 4-11:
4.3.12
To perform an erase of the data memory, after a Bulk
Erase Data Memory command, wait a minimum of
T
To erase data memory when data code-protect is active
(CPD = 0), the Bulk Erase Program Memory command
should be used.
FIGURE 4-12:
 2010 Microchip Technology Inc.
Address 0000h-7FFFh:
Address 8000h-8008h:
ERAB
Program Memory is erased
Configuration Words are erased
If CPD = 0, Data Memory is erased
Program Memory is erased
Configuration Words are erased
User ID Locations are erased
If CPD = 0, Data Memory is erased
to complete Bulk Erase.
PIC16F193X/LF193X/PIC16F194X/LF194X/
BULK ERASE PROGRAM MEMORY
BULK ERASE DATA MEMORY
ICSPCLK
ICSPDAT
ICSPCLK
ICSPDAT
BULK ERASE PROGRAM MEMORY
BULK ERASE DATA MEMORY COMMAND
1
1
1
1
2
0
2
1
3
3
0
0
4
4
1
1
5
5
0
X
After receiving the Bulk Erase Program Memory
command the erase will not complete until the time
interval, T
After receiving the Bulk Erase Data Memory command,
the erase will not complete until the time interval,
T
ERAB
Note:
Note:
Wait a minimum of
6
X
6
, has expired.
X
T
ERAB
ERAB
The code protection Configuration bit
(CP) has no effect on the Bulk Erase
Program Memory command.
Data memory will not erase if code-
protected (CPD = 0).
T
ERAB
, has expired.
1
X
Next Command
2
Next Command
0
1
X
2
X
DS41397B-page 25
3
X