PIC16LC433T-I/SO Microchip Technology, PIC16LC433T-I/SO Datasheet - Page 48

• Manufacturer Part Number: PIC16LC433T-I/SO
• Description: IC MCU CMOS 8BIT 10MHZ 2K 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16LC433T-I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 10MHz
• Connectivity: LIN (Local Interconnect Network)
• Peripherals: POR, WDT
• Number Of I /o: 6
• Program Memory Size: 3.5KB (2K x 14)
• Program Memory Type: OTP
• Ram Size: 128 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 4x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

PIC16C433
8.4
Example 8-2 shows how to perform an A/D conversion.
The GPIO pins are configured as analog inputs. The
analog reference (V
interrupt is enabled and the A/D conversion clock is
F
EXAMPLE 8-2:
;
;
;
;
DS41139A-page 46
RC
Note:
Ensure that the required sampling time for the selected input channel has elapsed.
Then the conversion may be started.
. The conversion is performed on the GP0 channel.
BSF
CLRF
BSF
BCF
MOVLW
MOVWF
BCF
BSF
BSF
BSF
:
:
A/D Conversions
The GO/DONE bit should NOT be set in
the same instruction that turns on the A/D.
STATUS, RP0
ADCON1
PIE1,
STATUS, RP0
0xC1
ADCON0
PIR1,
INTCON, PEIE
INTCON, GIE
ADCON0, GO
DOING AN A/D CONVERSION
REF
) is the device V
ADIE
ADIF
; Select Page 1
; Configure A/D inputs
; Enable A/D interrupts
; Select Page 0
; RC Clock, A/D is on, Channel 0 is selected
;
; Clear A/D interrupt flag bit
; Enable peripheral interrupts
; Enable all interrupts
; Start A/D Conversion
; The ADIF bit will be set and the GO/DONE bit
;
DD
is cleared upon completion of the A/D Conversion.
Advance Information
. The A/D
Clearing the GO/DONE bit during a conversion will
abort the current conversion. The ADRES register will
NOT be updated with the partially completed A/D con-
version sample. That is, the ADRES register will con-
tinue to contain the value of the last completed
conversion (or the last value written to the ADRES reg-
ister). After the A/D conversion is aborted, a 2T
is required before the next acquisition is started. After
this 2T
the selected channel.
AD
wait, an acquisition is automatically started on
2001 Microchip Technology Inc.
AD
wait