PIC16LC71-04I/SO Microchip Technology, PIC16LC71-04I/SO Datasheet - Page 48

• Manufacturer Part Number: PIC16LC71-04I/SO
• Description: IC MCU OTP 1KX14 A/D 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16LC71-04I/SO

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 4MHz
• Peripherals: POR, WDT
• Number Of I /o: 13
• Program Memory Size: 1.75KB (1K x 14)
• Program Memory Type: OTP
• Ram Size: 36 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 4x8b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 18-SOIC (7.5mm Width)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Connectivity: -

PIC16C71X
FIGURE 8-2:
FIGURE 8-3:
DS30272A-page 48
bit13
bit 13-7 CP0: Code protection bits
bit 6:
bit 3:
bit 2:
bit 1-0:
Note 1: Enabling Brown-out Reset automatically enables Power-up Timer (PWRT) regardless of the value of bit PWRTE.
bit13
bit 13-8
bit 7:
bit 6:
bit 3:
bit 2:
bit 1-0:
Note 1: Enabling Brown-out Reset automatically enables Power-up Timer (PWRT) regardless of the value of bit PWRTE.
CP0
CP1
5-4:
5-4: 1 = Code protection off
2: All of the CP0 bits have to be given the same value to enable the code protection scheme listed.
2: All of the CP1:CP0 pairs have to be given the same value to enable the code protection scheme listed.
CP0
CP0
0 = All memory is code protected, but 00h - 3Fh is writable
BODEN: Brown-out Reset Enable bit
1 = BOR enabled
0 = BOR disabled
PWRTE: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
FOSC1:FOSC0: Oscillator Selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
Ensure the Power-up Timer is enabled anytime Brown-out Reset is enabled.
CP1:CP0: Code Protection bits
11 = Code protection off
10 = Upper half of program memory code protected
01 = Upper 3/4th of program memory code protected
00 = All memory is code protected
MPEEN: Memory Parity Error Enable
1 = Memory Parity Checking is enabled
0 = Memory Parity Checking is disabled
BODEN: Brown-out Reset Enable bit
1 = BOR enabled
0 = BOR disabled
PWRTE: Power-up Timer Enable bit
1 = PWRT disabled
0 = PWRT enabled
WDTE: Watchdog Timer Enable bit
1 = WDT enabled
0 = WDT disabled
FOSC1:FOSC0: Oscillator Selection bits
11 = RC oscillator
10 = HS oscillator
01 = XT oscillator
00 = LP oscillator
Ensure the Power-up Timer is enabled anytime Brown-out Reset is enabled.
CP1
CP0
CONFIGURATION WORD, PIC16C710/711
CONFIGURATION WORD, PIC16C715
CP0
CP0
CP1
CP0
CP0 MPEEN BODEN
CP0
(2)
CP0 BODEN
(2)
(1)
(1)
(1)
(1)
CP1
CP0
CP0
CP0
PWRTE WDTE FOSC1 FOSC0
PWRTE WDTE FOSC1 FOSC0
bit0
bit0
1997 Microchip Technology Inc.
Register:
Address
Register:
Address
CONFIG
CONFIG
2007h
2007h