DSPIC33FJ32MC202-I/SO Microchip Technology, DSPIC33FJ32MC202-I/SO Datasheet - Page 305

• Manufacturer Part Number: DSPIC33FJ32MC202-I/SO
• Description: IC DSPIC MCU/DSP 32K 28SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ32MC202-I/SO

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Core Frequency: 40MHz
• Core Supply Voltage: 2.75V
• Embedded Interface Type: I2C, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 32KB
• Supply Voltage Range: 3V To 3.6V
• Package: 28SOIC W
• Device Core: dsPIC
• Family Name: dsPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 6-chx10-bit|6-chx12-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

TABLE A-1:
© 2011 Microchip Technology Inc.
Section 15.0 “Motor Control PWM
Module”
Section 16.0 “Quadrature Encoder
Interface (QEI) Module”
Section 17.0 “Serial Peripheral
Interface (SPI)”
dsPIC33FJ32MC202/204 and dsPIC33FJ16MC304
Section Name
MAJOR SECTION UPDATES (CONTINUED)
Removed the following sections, which are now available in the related
section of the dsPIC33F/PIC24H Family Reference Manual:
• 14.3 “PWM Time Base”
• 14.4 “PWM Period”
• 14.5 “Edge-Aligned PWM”
• 14.6 “Center-Aligned PWM”
• 14.7 “PWM Duty Cycle Comparison Units”
• 14.8 “Complementary PWM Operation”
• 14.9 “Dead-Time Generators”
• 14.10 “Independent PWM Output”
• 14.11 “Single Pulse PWM Operation”
• 14.12 “PWM Output Override”
• 14.13 “PWM Output and Polarity Control”
• 14.14 “PWM Fault Pins”
• 14.15 “PWM Update Lockout”
• 14.16 “PWM Special Event Trigger”
• 14.17 “PWM Operation During CPU Sleep Mode”
• 14.18 “PWM Operation During CPU Idle Mode”
Removed the following sections, which are now available in the related
section of the dsPIC33F/PIC24H Family Reference Manual:
• 15.1 “Quadrature Encoder Interface Logic”
• 15.2 “16-bit Up/Down Position Counter Mode”
• 15.3 “Position Measurement Mode”
• 15.4 “Programmable Digital Noise Filters”
• 15.5 “Alternate 16-bit Timer/Counter”
• 15.6 QEI Module Operation During CPU Sleep Mode”
• 15.7 “QEI Module Operation During CPU Idle Mode”
• 15.8 “Quadrature Encoder Interface Interrupts”
Removed the following sections, which are now available in the related
section of the dsPIC33F/PIC24H Family Reference Manual:
• 16.1 “Interrupts”
• 16.2 “Receive Operations”
• 16.3 “Transmit Operations”
• 16.4 “SPI Setup” (retained Figure 17-1: SPI Module Block Diagram)
Update Description
DS70283H-page 305