DSPIC33FJ64GP204-I/PT Microchip Technology, DSPIC33FJ64GP204-I/PT Datasheet - Page 321

• Manufacturer Part Number: DSPIC33FJ64GP204-I/PT
• Description: IC DSPIC MCU/DSP 64K 44-TQFP
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ64GP204-I/PT

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: AC'97, Brown-out Detect/Reset, DMA, I²S, POR, PWM, WDT
• Number Of I /o: 35
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 13x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP, 44-VQFP
• Core Frequency: 40MHz
• Embedded Interface Type: ECAN, I2C, SPI, UART
• No. Of I/o's: 35
• Flash Memory Size: 64KB
• Supply Voltage Range: 3V To 3.6V
• Operating Temperature Range: -40°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

30.0
This section provides an overview of dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, and dsPIC33FJ128GPX02/
X04 electrical characteristics. Additional information is provided in future revisions of this document as it becomes
available.
Absolute maximum ratings for the dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, and dsPIC33FJ128GPX02/X04
family are listed below. Exposure to these maximum rating conditions for extended periods can affect device reliability.
Functional operation of the device at these or any other conditions above the parameters indicated in the operation
listings of this specification is not implied.
Absolute Maximum Ratings
Ambient temperature under bias.............................................................................................................-40°C to +125°C
Storage temperature .............................................................................................................................. -65°C to +160°C
Voltage on V
Voltage on any pin that is not 5V tolerant with respect to V
Voltage on any 5V tolerant pin with respect to V
Voltage on any 5V tolerant pin with respect to Vss when V
Voltage on V
Maximum current out of V
Maximum current into V
Maximum output current sunk by any I/O pin
Maximum output current sourced by any I/O pin
Maximum current sunk by all ports .......................................................................................................................200 mA
Maximum current sourced by all ports
© 2011 Microchip Technology Inc.
dsPIC33FJ32GP302/304, dsPIC33FJ64GPX02/X04, AND dsPIC33FJ128GPX02/X04
Note 1: Stresses above those listed under “Absolute Maximum Ratings” can cause permanent damage to the
2: Maximum allowable current is a function of device maximum power dissipation (see
3: Exceptions are CLKOUT, which is able to sink/source 25 mA, and the V
4: See the
ELECTRICAL CHARACTERISTICS
device. This is a stress rating only, and functional operation of the device at those or any other conditions
above those indicated in the operation listings of this specification is not implied. Exposure to maximum
rating conditions for extended periods can affect device reliability.
and PGEDx pins, which are able to sink/source 12 mA.
DD
CAP
with respect to V
with respect to V
“Pin
DD
SS
Diagrams” section for 5V tolerant pins.
pin
pin ...........................................................................................................................300 mA
(2)
...........................................................................................................................250 mA
SS
SS
(1)
......................................................................................................... -0.3V to +4.0V
...................................................................................................... 2.25V to 2.75V
(2)
...............................................................................................................200 mA
(3)
........................................................................................................4 mA
SS
(3)
...................................................................................................4 mA
when V
SS
DD
DD
(4)
< 3.0V
≥ 3.0V
.................................................... -0.3V to (V
(4)
(4)
...................................................... -0.3V to 3.6V
.................................................. -0.3V to +5.6V
REF
+, V
REF
-, SCLx, SDAx, PGECx
Table
DS70292E-page 321
30-2).
DD
+ 0.3V)