PIC24HJ64GP210-I/PF Microchip Technology, PIC24HJ64GP210-I/PF Datasheet - Page 213

• Manufacturer Part Number: PIC24HJ64GP210-I/PF
• Description: IC PIC MCU FLASH 32KX16 100TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Hr

Specifications of PIC24HJ64GP210-I/PF

• Core Size: 16-Bit
• Program Memory Size: 64KB (22K x 24)
• Core Processor: PIC
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Number Of I /o: 85
• Program Memory Type: FLASH
• Ram Size: 8K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 32x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Controller Family/series: PIC24
• No. Of I/o's: 85
• Ram Memory Size: 8KB
• Cpu Speed: 40MIPS
• No. Of Timers: 13
• No. Of Pwm Channels: 8
• Embedded Interface Type: I2C, SPI, UART
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 876-1004 - PIC24 BREAKOUT BOARDAC164333 - MODULE SKT FOR PM3 100QFPDM300024 - KIT DEMO DSPICDEM 1.1MA240012 - MODULE PLUG-IN PIC24H 100QFPDV164033 - KIT START EXPLORER 16 MPLAB ICD2DM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 19-1:
© 2006 Microchip Technology Inc.
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15
bit 14
bit 13
bit 12
bit 11
bit 10
bit 9-8
bit 7-5
bit 4
R/W-0
ADON
R/W-0
ADON: A/D Operating Mode bit
1 = A/D converter module is operating
0 = A/D converter is off
Unimplemented: Read as ‘0’
ADSIDL: Stop in Idle Mode bit
1 = Discontinue module operation when device enters Idle mode
0 = Continue module operation in Idle mode
ADDMABM: DMA Buffer Build Mode bit
1 = DMA buffers are written in the order of conversion. The module will provide an address to the DMA
0 = DMA buffers are written in Scatter/Gather mode. The module will provide a scatter/gather address
Unimplemented: Read as ‘0’
AD12B: 10-bit or 12-bit Operation Mode bit
1 = 12-bit, 1-channel A/D operation
0 = 10-bit, 4-channel A/D operation
FORM<1:0>: Data Output Format bits
For 10-bit operation:
11 = Signed fractional (D
10 = Fractional (D
01 = Signed integer (D
00 = Integer (D
For 12-bit operation:
11 = Signed fractional (D
10 = Fractional (D
01 = Signed Integer (D
00 = Integer (D
SSRC<2:0>: Sample Clock Source Select bits
111 = Internal counter ends sampling and starts conversion (auto-convert)
110 = Reserved
101 = Reserved
100 = Reserved
011 = Reserved
010 = GP timer (Timer3 for ADC1, Timer5 for ADC2) compare ends sampling and starts conversion
001 = Active transition on INTx pin ends sampling and starts conversion
000 = Clearing sample bit ends sampling and starts conversion
Unimplemented: Read as ‘0’
SSRC<2:0>
R/W-0
channel that is the same as the address used for the non-DMA stand-alone buffer.
to the DMA channel, based on the index of the analog input and the size of the DMA buffer.
U-0
—
ADxCON1: ADCx CONTROL REGISTER 1 (where x = 1 or 2)
HC = Cleared by hardware
W = Writable bit
‘1’ = Bit is set
OUT
OUT
ADSIDL
OUT
OUT
R/W-0
R/W-0
= 0000 00dd dddd dddd)
= 0000 dddd dddd dddd)
= dddd dddd dd00 0000)
= dddd dddd dddd 0000)
OUT
OUT
OUT
OUT
= ssss sssd dddd dddd, where s = .NOT.d<9>)
= ssss sddd dddd dddd, where s = .NOT.d<11>)
= sddd dddd dd00 0000, where s = .NOT.d<9>)
= sddd dddd dddd 0000, where s = .NOT.d<11>)
ADDMABM
R/W-0
Preliminary
U-0
—
HS = Set by hardware
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
SIMSAM
R/W-0
U-0
—
AD12B
R/W-0
R/W-0
ASAM
x = Bit is unknown
HC,HS
R/W-0
R/W-0
SAMP
FORM<1:0>
PIC24H
DS70175C-page 211
HC, HS
R/W-0
DONE
R/C-0
bit 8
bit 0