PIC24FJ256DA106-I/PT Microchip Technology, PIC24FJ256DA106-I/PT Datasheet - Page 260

• Manufacturer Part Number: PIC24FJ256DA106-I/PT
• Description: MCU PIC 16BIT FLASH 256K 64TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256DA106-I/PT

• Core Size: 16-Bit
• Program Memory Size: 256KB (85.5K x 24)
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, GFX, LVD, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Type: FLASH
• Ram Size: 24K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Controller Family/series: PIC24
• No. Of I/o's: 52
• Ram Memory Size: 24KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• Interface: I2C, SPI, UART, USB
• Embedded Interface Type: I2C, SPI, UART, USB
• Rohs Compliant: Yes
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 24 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 29
• Number Of Timers: 5
• Operating Supply Voltage: 2.2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, AC164127-4, AC164127-6, AC164139, DM240001, DM240312, DV164039
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 16 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC24FJ256DA210 FAMILY
REGISTER 18-8:
DS39969B-page 260
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-8
bit 7
bit 6
bit 5
bit 4
bit 3
bit 2
bit 1
bit 0
R-x, HSC
JSTATE
U-0
—
Unimplemented: Read as ‘0’
JSTATE: Live Differential Receiver J State Flag bit
1 = J state (differential ‘0’ in low speed, differential ‘1’ in full speed) is detected on the USB
0 = No J state is detected
SE0: Live Single-Ended Zero Flag bit
1 = Single-ended zero is active on the USB bus
0 = No single-ended zero is detected
TOKBUSY: Token Busy Status bit
1 = Token is being executed by the USB module in On-The-Go state
0 = No token is being executed
USBRST: Module Reset bit
1 = USB Reset has been generated; for software Reset, application must set this bit for 50 ms, then
0 = USB Reset is terminated
HOSTEN: Host Mode Enable bit
1 = USB host capability is enabled; pull-downs on D+ and D- are activated in hardware
0 = USB host capability is disabled
RESUME: Resume Signaling Enable bit
1 = Resume signaling is activated; software must set bit for 10 ms and then clear to enable remote
0 = Resume signaling is disabled
PPBRST: Ping-Pong Buffers Reset bit
1 = Reset all Ping-Pong Buffer Pointers to the even BD banks
0 = Ping-Pong Buffer Pointers are not reset
SOFEN: Start-Of-Frame Enable bit
1 = Start-Of-Frame token is sent every one 1 ms
0 = Start-Of-Frame token is disabled
R-x, HSC
SE0
clear it
wake-up
U-0
—
U1CON: USB CONTROL REGISTER (HOST MODE ONLY)
U = Unimplemented bit, read as ‘0’
W = Writable bit
‘1’ = Bit is set
TOKBUSY
R/W-0
U-0
—
USBRST
R/W-0
U-0
—
HSC = Hardware Settable/Clearable bit
‘0’ = Bit is cleared
HOSTEN
R/W-0
U-0
—
RESUME
R/W-0
U-0
—
 2010 Microchip Technology Inc.
x = Bit is unknown
PPBRST
R/W-0
U-0
—
SOFEN
R/W-0
U-0
—
bit 8
bit 0