AT91SAM7S64B-MU Atmel, AT91SAM7S64B-MU Datasheet - Page 24

• Manufacturer Part Number: AT91SAM7S64B-MU
• Description: IC ARM7 MCU FLASH 64K 64QFN
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM7S64B-MU

• Package / Case: 64-QFN
• Voltage - Supply (vcc/vdd): 1.65 V ~ 1.95 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 55MHz
• Number Of I /o: 32
• Core Processor: ARM7
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Program Memory Size: 64KB (64K x 8)
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Peripherals: Brown-out Detect/Reset, DMA, POR, PWM, WDT
• Connectivity: I²C, SPI, SSC, UART/USART, USB
• Core Size: 16/32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

8.8.3.5
8.8.3.6
Table 8-1.
8.8.4
24
Device
SAM7S512
SAM7S256
SAM7S128
SAM7S64
SAM7S321/32
SAM7S161/16
SAM7S Series Summary
Security Bit Feature
SAM7S321/32
SAM7S161/16
Flash Configuration Summary
The 16 NVM bits are software programmable through the EFC User Interface. The command
“Set Lock Bit” enables the protection. The command “Clear Lock Bit” unlocks the lock region.
Asserting the ERASE pin clears the lock bits, thus unlocking the entire Flash.
The Embedded Flash Controller manages 8 lock bits to protect 8 regions of the flash against
inadvertent flash erasing or programming commands. The SAM7S321/32 contains 8 lock
regions and each lock region contains 32 pages of 128 bytes. Each lock region has a size of 4
Kbytes.
If a locked-region’s erase or program command occurs, the command is aborted and the
LOCKE bit in the MC_FSR register rises and the interrupt line rises if the LOCKE bit has been
written at 1 in the MC_FMR register.
The 8 NVM bits are software programmable through the EFC User Interface. The command “Set
Lock Bit” enables the protection. The command “Clear Lock Bit” unlocks the lock region.
Asserting the ERASE pin clears the lock bits, thus unlocking the entire Flash.
The Embedded Flash Controller manages 8 lock bits to protect 8 regions of the flash against
inadvertent flash erasing or programming commands. The SAM7S161/16 contains 8 lock
regions and each lock region contains 32 pages of 64 bytes. Each lock region has a size of 2
Kbytes.
If a locked-region’s erase or program command occurs, the command is aborted and the
LOCKE bit in the MC_FSR register rises and the interrupt line rises if the LOCKE bit has been
written at 1 in the MC_FMR register.
The 8 NVM bits are software programmable through the EFC User Interface. The command “Set
Lock Bit” enables the protection. The command “Clear Lock Bit” unlocks the lock region.
Asserting the ERASE pin clears the lock bits, thus unlocking the entire Flash.
Table 8-1
The SAM7S Series features a security bit, based on a specific NVM Bit. When the security is
enabled, any access to the Flash, either through the ICE interface or through the Fast Flash Pro-
gramming Interface, is forbidden. This ensures the confidentiality of the code programmed in the
Flash.
Number of Lock Bits
32
16
8
16
8
8
summarizes the configuration of the eight devices.
Number of Pages in the Lock Region
64
64
64
32
32
32
Page Size
256 bytes
256 bytes
256 bytes
128 bytes
128 bytes
64 bytes
6175JS–ATARM–28-Jul-11