AT91SAM9G10-CU Atmel, AT91SAM9G10-CU Datasheet - Page 2

• Manufacturer Part Number: AT91SAM9G10-CU
• Description: IC MCU ARM9 SAMPLING 217CBGA
• Manufacturer: Atmel
• Series: AT91SAMr

Specifications of AT91SAM9G10-CU

• Core Processor: ARM9
• Core Size: 16/32-Bit
• Speed: 266MHz
• Connectivity: EBI/EMI, I²C, IrDA, ISI, MMC, SPI, SSC, UART/USART, USB
• Peripherals: DMA, LCD, POR, PWM, WDT
• Number Of I /o: 96
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: ROM
• Ram Size: 48K x 8
• Voltage - Supply (vcc/vdd): 1.08 V ~ 1.32 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 217-LFBGA
• Controller Family/series: AT91
• No. Of I/o's: 96
• Ram Memory Size: 16KB
• Cpu Speed: 266MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• Processor Series: AT91SAMx
• Core: ARM926EJ-S
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: EBI, SPI, TWI, USART
• Maximum Clock Frequency: 266 MHz
• Number Of Programmable I/os: 96
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: JTRACE-ARM-2M, MDK-ARM, RL-ARM, ULINK2
• Development Tools By Supplier: AT91SAM-ICE, AT91-ISP, AT91SAM9G10-EK
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Details

•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2
Advanced Interrupt Controller (AIC)
Debug Unit (DBGU)
Periodic Interval Timer (PIT)
Watchdog Timer (WDT)
Real-Time Timer (RTT)
Three 32-bit Parallel Input/Output Controllers (PIO) PIOA, PIOB and PIOC
Nineteen Peripheral DMA (PDC) Channels
Multimedia Card Interface (MCI)
Three Synchronous Serial Controllers (SSC)
Three Universal Synchronous/Asynchronous Receiver Transmitters (USART)
Two Master/Slave Serial Peripheral Interface (SPI)
One Three-channel 16-bit Timer/Counters (TC)
Two-wire Interface (TWI)
IEEE
Required Power Supplies:
Available in a 217-ball LFBGA RoHS-compliant Package
– Individually Maskable, Eight-level Priority, Vectored Interrupt Sources
– Three External Interrupt Sources and One Fast Interrupt Source, Spurious Interrupt Protected
– 2-wire USART and support for Debug Communication Channel, Programmable ICE Access Prevention
– Mode for General Purpose Two-wire UART Serial Communication
– 20-bit Interval Timer plus 12-bit Interval Counter
– Key Protected, Programmable Only Once, Windowed 12-bit Counter, Running at Slow Clock
– 32-bit Free-running Backup Counter Running at Slow Clock
– 96 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os
– Input Change Interrupt Capability on Each I/O Line
– Individually Programmable Open-drain, Pull-up Resistor and Synchronous Output
– Schmitt Trigger on All Inputs
– SDCard/SDIO and MultiMediaCard
– Automatic Protocol Control and Fast Automatic Data Transfers with PDC, MMC and SDCard Compliant
– Independent Clock and Frame Sync Signals for Each Receiver and Transmitter
– I²S Analog Interface Support, Time Division Multiplex Support
– High-speed Continuous Data Stream Capabilities with 32-bit Data Transfer
– Individual Baud Rate Generator, IrDA
– Support for ISO7816 T0/T1 Smart Card, Hardware and Software Handshaking, RS485 Support
– 8- to 16-bit Programmable Data Length, Four External Peripheral Chip Selects
– Three External Clock Inputs, Two multi-purpose I/O Pins per Channel
– Double PWM Generation, Capture/Waveform Mode, Up/Down Capability
– Master Mode Support, All Two-wire Atmel EEPROMs Supported
– Compatibility with Standard Two-wire Serial Memories
– One, Two or Three Bytes for Slave Address
– Sequential Read/Write Operations
– Master, Multi-master and Slave Mode Operation
– Bit rate: up to 400 Kbits
– GEneral Call Supported in Slave Mode
– 1.08V to 1.32V for VDDCORE and VDDBU
– 3.0V to 3.6V for VDDOSC and for VDDPLL
– 2.7V to 3.6V for VDDIOP (Peripheral I/Os)
– 1.65V to 3.6V for VDDIOM (Memory I/Os)
®
1149.1 JTAG Boundary Scan on All Digital Pins
AT91SAM9G10
™
Compliant
®
Infrared Modulation/Demodulation
6462AS–ATARM–03-Jun-09