TS87C58X2-VCA Atmel, TS87C58X2-VCA Datasheet - Page 34

• Manufacturer Part Number: TS87C58X2-VCA
• Description: IC MCU 8BIT 32K OTP 40MHZ 40-DIP
• Manufacturer: Atmel
• Series: 87Cr

Specifications of TS87C58X2-VCA

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 40/30MHz
• Connectivity: UART/USART
• Peripherals: POR, WDT
• Number Of I /o: 32
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: OTP
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Oscillator Type: Internal
• Operating Temperature: 0°C ~ 70°C
• Package / Case: 40-DIP (0.600", 15.24mm)
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Data Converters: -

14. Power-Off Flag
34
AT/TS8xC54/8X2
The power-off flag allows the user to distinguish between a “cold start” reset and a “warm start”
reset.
A cold start reset is the one induced by V
applied to the device and could be generated for example by an exit from power-down.
The power-off flag (POF) is located in PCON register (See Table 14-1.). POF is set by hardware
when V
ing the user to determine the type of reset.
The POF value is only relevant with a Vcc range from 4.5V to 5.5V. For lower Vcc value, reading
POF bit will return indeterminate value.
Table 14-1.
Reset Value = 00X1 0000b
Not bit addressable
Number
SMOD1
Bit
7
6
5
4
3
2
1
0
7
CC
rises from 0 to its nominal voltage. The POF can be set or cleared by software allow-
Mnemonic
SMOD1
SMOD0
POF
GF1
GF0
IDL
PD
Bit
PCON Register
PCON - Power Control Register (87h)
SMOD0
-
6
Serial port Mode bit 1
Set to select double baud rate in mode 1, 2 or 3.
Serial port Mode bit 0
Clear to select SM0 bit in SCON register.
Set to to select FE bit in SCON register.
Reserved
The value read from this bit is indeterminate. Do not set this bit.
Power-Off Flag
Clear to recognize next reset type.
Set by hardware when V
General purpose Flag
Cleared by user for general purpose usage.
Set by user for general purpose usage.
General purpose Flag
Cleared by user for general purpose usage.
Set by user for general purpose usage.
Power-Down mode bit
Cleared by hardware when reset occurs.
Set to enter power-down mode.
Idle mode bit
Clear by hardware when interrupt or reset occurs.
Set to enter idle mode.
5
-
POF
CC
CC
4
switch-on. A warm start reset occurs while V
rises from 0 to its nominal voltage. Can also be set by software.
GF1
3
Description
GF0
2
PD
1
4431E–8051–04/06
CC
IDL
0
is still