MCP602-I/SN Microchip Technology, MCP602-I/SN Datasheet - Page 14

• Manufacturer Part Number: MCP602-I/SN
• Description: IC OPAMP DUAL SNGL SUPPLY 8SOIC
• Manufacturer: Microchip Technology

Specifications of MCP602-I/SN

• Slew Rate: 2.3 V/µs
• Package / Case: 8-SOIC (3.9mm Width)
• Amplifier Type: General Purpose
• Number Of Circuits: 2
• Output Type: Rail-to-Rail
• Gain Bandwidth Product: 2.8MHz
• Current - Input Bias: 1pA
• Voltage - Input Offset: 700µV
• Current - Supply: 230µA
• Current - Output / Channel: 22mA
• Voltage - Supply, Single/dual (±): 2.7 V ~ 6 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Number Of Channels: 2
• Common Mode Rejection Ratio (min): 75 dB
• Input Offset Voltage: 2 mV
• Input Bias Current (max): 60 pA
• Operating Supply Voltage: 3 V, 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Shutdown: No
• Supply Voltage (max): 6 V
• Supply Voltage (min): 2.7 V
• Technology: CMOS
• Voltage Gain Db: 115 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

MCP601/2/3/4
4.0
Microchip provides the basic design tools needed for
the MCP601/2/3/4 family of op amps.
4.1
The latest SPICE macro model of the MCP601/2/3/4 op
amps is available on Microchip’s web site at
www.microchip.com. This model is intended as an
initial design tool that works well in the op amp’s linear
region of operation at room temperature. See the
SPICE
capabilities.
Bench testing is a very important part of any design and
cannot be replaced with simulations. Also, simulation
results using this macro model need to be validated by
comparing them to the data sheet specs and plots.
4.2
FilterLab
simplifies analog active-filter (using op amps) design.
Available at no cost from Microchip’s web site at
www.microchip.com, the FilterLab active-filter software
design tool provides full schematic diagrams of the filter
circuit with component values. It also outputs the filter
circuit in SPICE format, which can be used with the
macro model to simulate actual filter performance.
DS21314F-page 14
®
DESIGN TOOLS
SPICE Macro Model
FilterLab
model
2.0 is an innovative software tool that
firmware
®
2.0
for
information
on
its
2004 Microchip Technology Inc.