LT1014CN#PBF Linear Technology, LT1014CN#PBF Datasheet - Page 10

• Manufacturer Part Number: LT1014CN#PBF
• Description: IC PRECISION OP-AMP QUAD 14-DIP
• Manufacturer: Linear Technology

Specifications of LT1014CN#PBF

• Amplifier Type: General Purpose
• Number Of Circuits: 4
• Slew Rate: 0.4 V/µs
• Current - Input Bias: 15nA
• Voltage - Input Offset: 60µV
• Current - Supply: 350µA
• Current - Output / Channel: 20mA
• Voltage - Supply, Single/dual (±): 4 V ~ 44 V, ±2 V ~ 22 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Through Hole
• Package / Case: 14-DIP (0.300", 7.62mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Gain Bandwidth Product: -

applicaTions inForMaTion
LT1013/LT1014
b) When the input is more than 400mV below ground
(at 25°C), the input stage saturates (transistors Q3 and
Q4) and phase reversal occurs at the output. This can
cause lock-up in servo systems. Due to a unique phase
reversal protection circuitry (Q21, Q22, Q27, Q28), the
LT1013/LT1014’s outputs do not reverse, as illustrated
below, even when the inputs are at –1.5V.
There is one circumstance, however, under which the phase
reversal protection circuitry does not function: when the
other op amp on the LT1013, or one specific amplifier of
the other three on the LT1014, is driven hard into negative
saturation at the output.
Phase reversal protection does not work on amplifier:
A when D’s output is in negative saturation. B’s and C’s
outputs have no effect.
B when C’s output is in negative saturation. A’s and D’s
outputs have no effect.
C when B’s output is in negative saturation. A’s and D’s
outputs have no effect.
0
4V
2V
0V
6V
– 100
P-P
4
2
0
0
INPUT, – 1.5V TO 4.5V
V
Comparator Rise Response Time
10mV, 5mV, 2mV Overdrives
S
= 5V, 0V
Voltage Follower with Input Exceeding the Negative Common Mode Range
50µs/DIV
4V
2V
0V
EXHIBIT OUTPUT PHASE
LM324, LM358, OP-20
REVERSAL
D when A’s output is negative saturation. B’s and C’s
outputs have no effect.
At the output, the aforementioned single supply designs
either cannot swing to within 600mV of ground (OP-20)
or cannot sink more than a few microamperes while swing-
ing to ground (LM124, LM158). The LT1013/LT1014’s
all-NPN output stage maintains its low output resistance and
high gain characteristics until the output is saturated.
In dual supply operations, the output stage is crossover
distortion-free.
Comparator Applications
The single supply operation of the LT1013/LT1014 lends
itself to its use as a precision comparator with TTL com-
patible output:
In systems using both op amps and comparators, the
LT1013/LT1014 can perform multiple duties; for example,
on the LT1014, two of the devices can be used as op amps
and the other two as comparators.
100
4
2
0
0
Comparator Fall Response Time
to 10mV, 5mV, 2mV Overdrives
V
S
= 5V, 0V
4V
2V
0V
50µs/DIV
NO PHASE REVERSAL
LT1013/LT1014
10134fd