AD8022ARZ Analog Devices Inc, AD8022ARZ Datasheet - Page 12

• Manufacturer Part Number: AD8022ARZ
• Description: IC OPAMP VF DUAL LN LP 8SOIC
• Manufacturer: Analog Devices Inc

Specifications of AD8022ARZ

• Slew Rate: 50 V/µs
• Design Resources: AD7266 SAR ADC in DC-Coupled Differential and Single-Ended Appls (CN0039) AD7265 in Differential and Single-Ended Configurations Using AD8022 (CN0048)
• Amplifier Type: Voltage Feedback
• Number Of Circuits: 2
• -3db Bandwidth: 130MHz
• Current - Input Bias: 2.5µA
• Voltage - Input Offset: 1500µV
• Current - Supply: 4mA
• Current - Output / Channel: 55mA
• Voltage - Supply, Single/dual (±): 4.5 V ~ 26 V, ±2.25 V ~ 13 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (3.9mm Width)
• Op Amp Type: High Speed
• No. Of Amplifiers: 1
• Bandwidth: 130MHz
• Supply Voltage Range: ± 4.5V To ± 13V
• Amplifier Case Style: SOIC
• No. Of Pins: 8
• Common Mode Rejection Ratio: 98
• Current, Input Bias: 2.5 μA
• Current, Input Offset: ±120 nA
• Current, Output: ±55 mA
• Current, Supply: 4 mA
• Harmonic Distortion: -100 dBc
• Impedance, Thermal: 160 °C/W
• Number Of Amplifiers: Dual
• Package Type: SOIC-8
• Power Dissipation: 1.2 W
• Resistance, Input: 20 Kilohms (Differential)
• Temperature, Operating, Range: -40 to +85 °C
• Voltage, Input: -11.25 to +11.75 V (Common-Mode)
• Voltage, Noise: 2.5 nV/sqrt Hz
• Voltage, Offset: -1.5 μV
• Voltage, Output, High: +10.1 V
• Voltage, Output, Low: -10.1 V
• Voltage, Supply: ±12 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• Gain Bandwidth Product: -
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

AD8022
THEORY OF OPERATION
The AD8022 is a voltage-feedback op amp designed especially
for ADSL or other applications requiring very low voltage and
current noise along with low supply current, low distortion, and
ease of use.
The AD8022 is fabricated on Analog Devices’ proprietary
eXtra-Fast Complementary Bipolar (XFCB) process, which
enables the construction of PNP and NPN transistors with
similar fTs in the 4 GHz region. The process is dielectrically
isolated to eliminate the parasitic and latch-up problems caused
by junction isolation. These features enable the construction of
high frequency, low distortion amplifiers with low supply
currents.
+IN
–IN
600μA
Figure 38. Simplified Schematic
7.5pF
15Ω
15Ω
+V
OUTPUT
–V
S
S
Rev. B | Page 12 of 16
As shown in Figure 38, the AD8022 input stage consists of an
NPN differential pair in which each transistor operates a
300 μA collector current. This gives the input devices a high
transconductance and therefore gives the AD8022 a low input
noise of 2.5 nV/√Hz @ 100 kHz. The input stage drives a folded
cascode that consists of a pair of PNP transistors. These PNPs
then drive a current mirror that provides a differential input to
single-ended output conversion. The output stage provides a
high current gain of 10,000 so that the AD8022 can maintain a
high dc open-loop gain, even into low load impedances.