MC3403PG ON Semiconductor, MC3403PG Datasheet - Page 9

• Manufacturer Part Number: MC3403PG
• Description: IC OPAMP QUAD DIFF INPUT 14DIP
• Manufacturer: ON Semiconductor

Specifications of MC3403PG

• Amplifier Type: General Purpose
• Number Of Circuits: 4
• Slew Rate: 0.6 V/µs
• Gain Bandwidth Product: 1MHz
• Current - Input Bias: 200nA
• Voltage - Input Offset: 2000µV
• Current - Supply: 2.8mA
• Current - Output / Channel: 20mA
• Voltage - Supply, Single/dual (±): 3 V ~ 36 V, ±1.5 V ~ 18 V
• Operating Temperature: 0°C ~ 70°C
• Mounting Type: Through Hole
• Package / Case: 14-DIP (0.300", 7.62mm)
• Number Of Channels: 4
• Common Mode Rejection Ratio (min): 70 dB
• Input Voltage Range (max): Positive Rail - 2 V
• Input Voltage Range (min): Negative Rail
• Input Offset Voltage: 10 mV
• Input Bias Current (max): 500 nA
• Operating Supply Voltage: 36 V
• Supply Current: 2.8 mA
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Dual Supply Voltage: +/- 3 V, +/- 5 V, +/- 9 V
• Maximum Dual Supply Voltage: +/- 18 V
• Minimum Dual Supply Voltage: +/- 1.5 V
• Mounting Style: Through Hole
• Shutdown: No
• Supply Voltage (max): 36 V
• Supply Voltage (min): 3 V
• Technology: Bipolar
• Voltage Gain Db: 106.02 dB
• Bandwidth: 1 MHz
• Channel Separation: -120
• Common Mode Rejection Ratio: 90
• Current, Input Bias: -200 nA
• Current, Input Offset: 30 nA
• Current, Output: 20 mA
• Current, Supply: 2.8 mA
• Number Of Amplifiers: Quad
• Package Type: PDIP-14
• Temperature, Operating, Range: -40 to +85 °C
• Time, Fall: 0.35 μs
• Time, Rise: 0.35 μs
• Voltage, Gain: 200 V/mV
• Voltage, Input: ±18 VDC
• Voltage, Offset: 2 mV
• Voltage, Output, High: ±10 V
• Voltage, Output, Low: ±10 V
• Voltage, Supply: 3 to 36 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Output Type: -
• -3db Bandwidth: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: MC3403PGOS

PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
SEATING
PLANE
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [e-mail]
−T−
ON Semiconductor and
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
N
H
14
1
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
G
A
F
7
8
D
0.13 (0.005)
14 PL
B
C
K
N. American Technical Support: 800−282−9855 Toll Free
Europe, Middle East and Africa Technical Support:
Japan Customer Focus Center
PACKAGE DIMENSIONS
USA/Canada
Phone: [phone]
Phone: 81−3−5773−3850
M
http://onsemi.com
J
CASE 646−06
PDIP−14
ISSUE P
9
L
M
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEADS WHEN
4. DIMENSION B DOES NOT INCLUDE MOLD FLASH.
5. ROUNDED CORNERS OPTIONAL.
DIM
Y14.5M, 1982.
FORMED PARALLEL.
M
A
B
C
D
G
H
K
N
F
J
L
0.715
0.240
0.145
0.015
0.040
0.052
0.008
0.290
0.015
0.115
MIN
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
−−−
0.100 BSC
INCHES
0.770
0.260
0.185
0.021
0.070
0.095
0.015
0.135
0.310
0.039
MAX
10
_
18.16
MILLIMETERS
MIN
6.10
3.69
0.38
1.02
1.32
0.20
2.92
7.37
0.38
−−−
2.54 BSC
19.56
MAX
6.60
4.69
0.53
1.78
2.41
0.38
3.43
7.87
1.01
10
_
MC3403/D