B57236S0100M000 EPCOS Inc, B57236S0100M000 Datasheet - Page 9

• Manufacturer Part Number: B57236S0100M000
• Description: CURRENT LIMITER INRSH 10 OHM 20%
• Manufacturer: EPCOS Inc

Specifications of B57236S0100M000

• R @ 25°c: 10 Ohm
• Current - Steady State Max: 3.5A
• Tolerance: ±20%
• Diameter: 0.453" (11.51mm)
• Lead Spacing: 0.197" (5.00mm)
• Thermistor Type: NTC
• Resistance: 10ohm
• Beta Value (k): 2900
• Operating Temperature Range: -55°C To +170°C
• Operating Voltage Range: 265Vrms
• No. Of Pins: 2
• Svhc: No SVHC (18-Jun-2010)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• R @ Current: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 495-2094; B57236S 100M; B57236S100M; B57236S100M

Wave soldering
Temperature characteristic at component terminal with dual wave soldering
2
The leads meet the requirements of IEC 60068-2-21. They may not be bent closer than 4 mm
from the solder joint on the thermistor body or from the point at which they leave the feed-
throughs. During bending, any mechanical stress at the outlet of the leads must be removed. The
bending radius should be at least 0.75 mm.
Tensile strength:
Bending strength: Test Ub:
Torsional strength: Test Uc: severity 2
Please read Cautions and warnings and
Important notes at the end of this document.
Inrush current limiters
ICLs
Robustness of terminations
Two 90 -bends in opposite directions at a weight of 0.25 kg.
The lead is bent by 90 at a distance of 6 to 6.5 mm from the thermistor body.
The bending radius of the leads should be approx. 0.75 mm. Two torsions of
180 each (severity 2).
Test Ua1:
Leads
0.50 <
0.80 <
0.80 mm = 10.0 N
1.25 mm = 20.0 N
Page 9 of 15
B57236
S236