B57364S209M EPCOS Inc, B57364S209M Datasheet

Page 1

NTC thermistors for inrush current limiting Leaded and coated disks Series/Type: B57364 Date: March 2006 © EPCOS AG 2006. Reproduction, publication and dissemination of this publication, enclosures hereto and the information contained therein without EPCOS' prior express consent is prohibited. ...

Page 2

Inrush current limiters ICLs Applications Switch-mode power supplies Soft-start motors, e.g. in vacuum cleaners Features Useable in series connections up to 265 V Coated thermistor disk Kinked leads of tinned copper wire Wide resistance range UL approval (E69802) Options Resistance ...

Page 3

Inrush current limiters ICLs Reliability data Test Standard Storage in IEC dry heat 60068-2-2 Storage in damp IEC heat, steady state 60068-2-78 Rapid temperature IEC cycling 60068-2-14 Endurance Cyclic endurance Transient load Cautions and warnings for ICLs The self-heating of ...

Page 4

Inrush current limiters ICLs Cautions and warnings General See "Important notes" at the end of this document. Storage Store thermistors only in original packaging. Do not open the package before storage. Storage conditions in original packaging: storage temperature humidity 75% ...

Page 5

Inrush current limiters ICLs Operation Use thermistors only within the specified operating temperature range. Use thermistors only within the specified voltage and current ranges (ICLs). Environmental conditions must not harm the thermistors. Use thermistors only in normal atmospheric conditions. Contact ...

Page 6

Important notes The following applies to all products named in this publication: 1. Some parts of this publication contain statements about the suitability of our products for certain areas of application. These statements are based on our knowledge of typical ...