LP5900SD-2.8/NOPB National Semiconductor, LP5900SD-2.8/NOPB Datasheet - Page 2

• Manufacturer Part Number: LP5900SD-2.8/NOPB
• Description: IC REG LDO 150MA RF/ANLG 6-LLP
• Manufacturer: National Semiconductor

Specifications of LP5900SD-2.8/NOPB

• Regulator Topology: Positive Fixed
• Voltage - Output: 2.8V
• Voltage - Input: Up to 5.5V
• Voltage - Dropout (typical): 0.08V @ 150mA
• Number Of Regulators: 1
• Current - Output: 150mA (Max)
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 6-LLP
• For Use With: LP5900SD-2.8EV - BOARD EVALUATION LP5900SD-2.8
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Limit (min): -
• Other names: LP5900SD-2.8TR

www.national.com
Connection Diagrams
The actual physical placement of the package marking will vary from part to part.
Pin Descriptions
micro SMD
A1
B1
B2
A2
4-Bump Thin micro SMD Package and Extreme Thin micro SMD Package, Large Bump
Pin No.
LLP
Pad
4
3
1
6
Symbol
GND
V
GND
V
V
OUT
EN
IN
NS Package Number TLA04/XRA04
NS Package Number SDB06A
Enable input; disables the regulator when
regulator when
this input to ground.
Common ground
Output voltage. A 0.47 μF Low ESR capacitor should be connected to
this Pin. Connect this output to the load circuit.
Input voltage supply. A 0.47 µF capacitor should be connected at this
input.
Common Ground. Connect to Pin 3.
LLP-6 Package
2
≥
1.2V. An internal 1 MΩ pulldown resistor connects
Name and Function
≤
0.4V. Enables the
20144102
20144106