PMR25HZPFV4L00 Rohm Semiconductor, PMR25HZPFV4L00 Datasheet - Page 2

• Manufacturer Part Number: PMR25HZPFV4L00
• Description: RES .004 OHM 1W 1% 1210 SMD
• Manufacturer: Rohm Semiconductor
• Series: PMR25r

Specifications of PMR25HZPFV4L00

• Resistance (ohms): 0.004
• Power (watts): 1W
• Composition: Thick Film
• Features: Current Sense
• Temperature Coefficient: ±100ppm/°C
• Tolerance: ±1%
• Size / Dimension: 0.126" L x 0.098" W (3.20mm x 2.50mm)
• Height: 0.020" (0.51mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 1210 (3225 Metric)
• Resistance In Ohms: 0.004
• Case: 1210 (3225 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PMR25HZPFV4L00; RHM.004APTR

TSZ22111･05･002
● Safety Precautions
1) The products are designed and produced for application in ordinary electronic equipment (AV equipment,
2) The products are designed for use in a standard environment and not in any special environments.
3) The products are not radiation resistant.
4) Verification and confirmation of performance characteristics of product, after on-board mounting, is
5)In particular, if a transient load (a large amount of load applied in a short period of time, such as pulse)is
6) De-rate Power Dissipation(Pd)depending on Ambient temperature(Ta).
7) Confirm that operation temperature is within the specified range described in product specification.
8) Failure induced under deviant condition from what defined in the product specification can be not be
9)When product safety related problems arises, please immediately inform to ROHM, and consider
Application of the products in a special environment can deteriorate product performance. Accordingly,
verification and confirmation of product performance, prior to use, is recommended if used under the
following conditions:
advised.
Applied, confirmation of performance characteristics after on-board mounting is strongly recommended.
Avoid applying power exceeding normal rated power; exceeding the power rating under steady-state
Loading condition may negatively affect product performance and reliability.
OA equipment, telecommunication equipment, home appliances, amusement equipment, etc.).
If the products are to be used in devices requiring extremely high reliability (medical equipment,
transport equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment
including car accessories, safety devices, etc.) and whose malfunction or operational error may endanger
human life and sufficient fail-safe measures, please consult with the ROHM sales staff in advance. If
product malfunctions may result in serious damage, including that to human life, sufficient fail-safe
measures must be taken, including the following:
technical counter measure.
Guaranteed.
[a] Installation of protection circuits or other protective devices to improve system safety
[b] Installation of redundant circuits in the case of single-circuit failure
[d] Use in places where the products are exposed to static electricity or electromagnetic waves
[e] Use in proximity to heat-producing components, plastic cords, or other flammable items
[f] Use involving sealing or coating the products with resin or other coating materials
[g] Use involving unclean solder or use of water or water-soluble cleaning agents for cleaning after
[h] Use of the products in places subject to dew condensation
[a] Use in various types of liquid, including water, oils, chemicals, and organic solvents
[b] Use outdoors where the products are exposed to direct sunlight, or in dusty places
[c] Use in places where the products are exposed to sea winds or corrosive gases, including
Cl
soldering
2
, H
2
S, NH
3
, SO
PRODUCTS
ULTRA LOW OHMIC RESISTORS
REV.：
< Specifications (Precautions and Prohibitions) >
2
, and NO
００７Ｅ
2
TYPE
SPECIFICATION No.：ＰＭＲ２５－ＩＡ
PMR25 Series
PAGE
2/16