S20K250 EPCOS Inc, S20K250 Datasheet - Page 18

• Manufacturer Part Number: S20K250
• Description: VARISTOR 250VRMS 20MM RADIAL
• Manufacturer: EPCOS Inc
• Series: StandarDr

Specifications of S20K250

• Energy: 140J
• Varistor Voltage: 390V
• Current-surge: 8kA
• Number Of Circuits: 1
• Maximum Ac Volts: 250VAC
• Maximum Dc Volts: 320VDC
• Package / Case: Disc 20mm
• Technology: Metal Oxide
• Capacitance Value: 700pF
• Clamping Current: 100A
• Clamping Voltage: 650V
• Lead Style: Radial
• Ac Voltage Rating (max): 250VAC
• Dc Voltage Rating (max): 320VDC
• Operating Temp Range: -40C to 85C
• Mounting: Through Hole
• Surge Current (max): 8000A
• Lead Spacing: 10mm
• Product Depth (mm): 5.3mm
• Product Height (mm): 25.5mm
• Product Diameter (mm): 21.5mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 495-2404; B72220S 251K101; B72220S0251K101; B72220S251K101; B72220S251K101V57; S20K250

Reliability data
Test
Varistor voltage
Clamping voltage
Max. AC operating voltage
Surge current derating,
8/20 µs
Surge current derating,
2 ms
Electric strength
Please read Cautions and warnings and
Important notes at the end of this document.
Leaded varistors
StandarD series
Test methods/conditions
The voltage between two terminals with
the specified measuring current applied
is called V
The maximum voltage between two
terminals with the specified standard
impulse current (8/20 µs) applied.
CECC 42 000, test 4.20
1000 h at UCT
After having continuously applied
the maximum allowable voltage at UCT
±2 °C for 1000 h, the specimen shall be
stored at room temperature and normal
humidity for 1 to 2 h.
Thereafter, the change of V
measured.
CECC 42 000, test C 2.1
100 surge currents (8/20 µs), unipolar,
interval 30 s, amplitude corresponding
to derating curve for 100 impulses at
20 µs
CECC 42 000, test C 2.1
100 surge currents (2 ms), unipolar,
interval 120 s, amplitude corresponding
to derating curve for 100 impulses at
2 ms
CECC 42 000, test 4.7
Metal balls method, 2500 V
The varistor is placed in a container
holding 1.6 ±0.2 mm diameter metal
balls such that only the terminations of
the varistor are protruding.
The specified voltage shall be applied
between both terminals of the speci-
men connected together and the elec-
trode inserted between the metal balls.
v
(1 mA
DC
18
@ 0.2 … 2 s).
11/07
RMS
v
shall be
, 60 s
Requirement
To meet the specified value.
To meet the specified value.
|
|
(measured in direction
of surge current)
No visible damage
|
(measured in direction
of surge current)
No visible damage
No breakdown
∆V/V (1 mA)
∆V/V (1 mA)
∆V/V (1 mA)
|
|
|
≤10%
≤10%
≤10%