VC080518C400DP AVX Corporation, VC080518C400DP Datasheet - Page 3

• Manufacturer Part Number: VC080518C400DP
• Description: VARSITOR TVS 18VDC 100A 0805
• Manufacturer: AVX Corporation
• Series: TransGuard®r

Specifications of VC080518C400DP

• Package / Case: 0805 (2012 Metric)
• Varistor Voltage: 25.5V
• Current-surge: 100A
• Number Of Circuits: 1
• Maximum Ac Volts: 13VAC
• Maximum Dc Volts: 18VDC
• Energy: 0.30J
• Voltage Rating Dc: 18 V
• Voltage Rating Ac: 13 V
• Clamping Voltage: 42 V
• Peak Surge Current: 100 Amps
• Surge Energy Rating: 0.3 J
• Capacitance: 550 pF
• Operating Temperature Range: - 55 C to + 125 C
• Current Rating: 1 Amp
• Dimensions: 1.25 mm W x 2.01 mm L x 1.02 mm H
• Mounting: SMD/SMT
• Product: MLV
• Termination Style: SMD/SMT
• Brand/series: TransGuard®
• Current, Leakage, Maximum: 10 μA
• Current, Ratings: 100 A
• Current, Surge: 100 A
• Energy Rating: 0.3 Joules
• Mounting Type: SMD
• Package Type: 0805
• Primary Type: Transient Voltage Surge Suppressor
• Standards: UL Listed
• Suppressor Type: Multilayer Ceramic Transient Voltage Suppressors
• Temperature, Junction, Maximum: +125 °C
• Temperature, Junction, Minimum: –55 °C
• Termination: Solder
• Voltage, Clamping: 42 V
• Voltage, Operating: 13/18 VAC/VDC
• Voltage, Working: 18 VDC, 13 VAC
• Response Time: Less Than 1 ns
• Operation Temp: –55°C to +125°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: Industrial Equipment
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 478-2512-2

Group I
Visual and Mech
Breakdown Volta
Leakage Current
Clamping Voltag
Capacitance
Group II
Humidity Life
Group III
Life
Group IV
Peak Current (Ip)
Transient Energy
EXAMINAT
Addendum B – Qualification Plan
4) TEST RESULTS AND QUALIFICATION PACKAGE WILL BE PROVIDED BY QA/ ENG WHEN COMPLETE
e (Vc)
anical Inspection
1) THIS DOCUMENT RELATES TO THE QUALIFICATION OF THE LF500 QUALIFICATION IN TIANJIN
2) THIS QUALIFICATION PLAN IS BASED ON AUTOMOTIVE SPECIFICATION AEC-Q200
3) FORMATION OF QUALIFICATION LOTS
ION OR TEST
ge (Vb)
(I
(Et)
L
)
Page 3
a) THE LF500 DIELECTRIC WILL BE QUALIFIED BY FAMILY OF PARTS. THREE LOTS OF THE FOLLOWING DESIGNS WILL BE TESTED PER J9000
c) SINGLE LOT QUALS WILL BE COMPLETED ON ALL OTHER PART NUMBERS AS SHOWN IN TABLE ON QUAL LOT PLAN
d) THIS QUALIFICATION WILL INVOLVE MANUFACTURING LOTS ENTIRELY IN TIANJIN, ALL ON LF500
(Thermal Cycle, Thermal shock, RTSH, Solderability, Vibration, High Temp, Board Flex, Sheer Test, Moisture Resistance, Solvent Resistance)
b) THE FOLLOWING PART NUMBERS WILL BE USED TO QUALIFY FOR AUTOMOTIVE SPECIFCATION (1 LOT EACH) PER AEC-Q200
iv
iv
iii
iii
iii
ii
ii
ii
i
i
i
QUALIFICATION LOT PROTOCOL AND GENERAL INFORMATION REGARDING THIS MATERIAL QUALIFICATION
VC06AG18120YAT
VC080505C150
VC120605D150
VC121018J390
VC06AG18120YAT
VC080518C400
VC120618D400
VC121018J390
TIANJIN WILL MANUFACTURE AND FINISH REQUIRED LOTS AS SPECIFIED IN LOT QUAL SHEET
SUBMIT 1000 PIECES FROM EACH LOT TO COVER ALL TESTING
FORWARD ALL TEST SAMPLES WITH LOT IDENTIFICATION TO:
MR JOHN NICKLES
2875 HIGHWAY 501
CONWAY SC 29526
USA
Physical dimensions
TEST ITEMS
VC060305A150
VC080518C400
VC120630D650
VC121030H620
LF500
LF500
LF500
LF500
a) Apply 1mA of one polarity
b) Apply 8 X 20 microsec current pulse
c) Apply 1mA in same polarity as a) and b)
a) Apply 1mA of one polarity
b) Apply 8 X 20 microsec current pulse
c) Apply 1mA in same polarity as a) and b)
125C/Rated Voltage for 1000 hours. Readings
J-9000 QUALIFICATION INSPECTION
8 x 20 microsec pulse. 0.05-0.4J tested at 1A;
0.5Vrms: <= 0.1J @ 1MHz; >0.1J @1KHz
85C/85%RH/Rated Voltage for 500 hours.
20X microscope and/or appropriate
Readings at 0,100/250/500 hours
at 0/250/500/1000 hours
1mA, 50ms minimum
measurement device
>0.4J tested at 5A.
TEST METHOD*
W orking voltage
After 1000 hours, Vb within 10% of
After 500 hours, Vb within 10% of
s
pecified in product specification
+100%, -50% of catalog value
Less than maximum lim it as
Meets product specification
Meets product specification
+/- 10% from initial value
Vb in c) within 10% of a)
Vb in c) within 10% of a)
TEST CRITERIA
original value
original value
SAMPLE SIZE
March 11, 2009
100
100
30
30
80
80
ACCEPT / REJECT
Compare to former
specification.
Lots within
system.
1/2
1/2
1/2
1/2