ERJ-XGNJ303Y Panasonic - ECG, ERJ-XGNJ303Y Datasheet - Page 6

• Manufacturer Part Number: ERJ-XGNJ303Y
• Description: RESISTOR 30K OHM 1/32W 5% 01005
• Manufacturer: Panasonic - ECG
• Series: ERJr

Specifications of ERJ-XGNJ303Y

• Resistance (ohms): 30K
• Power (watts): 0.03W, 1/32W
• Composition: Thick Film
• Temperature Coefficient: ±200ppm/°C
• Tolerance: ±5%
• Size / Dimension: 0.016" L x 0.008" W (0.40mm x 0.20mm)
• Height: 0.005" (0.13mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 01005 (0402 Metric)
• Resistance In Ohms: 30.0K
• Case: 01005 (0402 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: ERJXGNJ303Y

Subject
Part No.
7. Machinery characteristic
Chip Resistor
Bending
strength
Solderability
Resistance to
soldering heat
Resistance to
vibration
(Low frequency)
Resistance to
solvent
Item
No mechanical damage.
∆R :
+/-(1%+0.05 ohm)
Termination should be
covered uniformly with solder
(Min. 95% coverage)
∆R :
+/-(1%+0.05 ohm)
∆R :
+/-(1%+0.05 ohm)
Without distinct
deformation in appearance
∆R :
+/-(0.5% +0.05 ohm)
Specification
PRODUCT SPECIFICATION FOR IMFORMATION
Panasonic Electronic Devices Co., Ltd.
ERJXGN
Substrate : Glass epoxy (t=1.0 mm)
Span : 90mm
Bending distance : 3mm (10 seconds)
<Test pattern>
Resistors shall be dipped in the melted solder
bath at 235 deg.C +/- 5 deg.C for 2 seconds
+/- 0.5 second. Flux shall be removed from
the surface of termination with clean organic
solvent.
Resistors shall be dipped in the melted solder
bath at 270 deg.C +/- 3 deg.C for 10 seconds
+/- 1 second.
Resistors shall be subjected to a single
vibration having as double amplitude of 1.5
mm in 3 directions perpendicular one another
for 2 hours each. (6 hours in total)
The vibration frequency shall be varied
uniformly from 10 Hz to 55 Hz, and return
to 10 Hz traversing for 1 min.
Solvent solution : Isopropyl alcohol
(1) Dipping 10 +/- 1 hours, dry in room
(2) Ultrasonic wave washing : 5 +/- 1 min.
condition for 30 +/- 10 minutes.
Dry in room condition for 30 +/-10 minutes.
Test Method (JIS-C5201-1)
0.2 0.2 0.2
(0.3W/cm
100
0.2
2
,28kHz)
Spec. No.
151-SRJ-EX07A
(mm)
11
-
5