SDSCC-072G-000000 SanDisk, SDSCC-072G-000000 Datasheet - Page 19

• Manufacturer Part Number: SDSCC-072G-000000
• Description: SSD 2.5" SATA 72GB
• Manufacturer: SanDisk
• Series: SSD SATAr

Specifications of SDSCC-072G-000000

• Memory Size: 72GB
• Memory Type: FLASH - Nand
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: FFD-25-SATA-72-C-P; FFD-25-SATA-72-C-P

Value of 1: Erase and fill with random data, several times. The number of erase/fill loops is
provided in the corresponding parameter. Zero number of loops means erase once and do not fill.
Only the 7 least significant bits in the parameter are used to specify the number of loops. The
most significant bit is reserved for future extensions.
Value of 2 or 3: These subcommands are reserved for future extensions.
Parameter1 corresponds to the subcommand in bits 0-1.
Parameter2 corresponds to the subcommand in bits 2-3.
Parameter3 corresponds to the subcommand in bits 4-5.
Partition Mask is either a bitmap of partitions to be sanitized or value 0. In bitmap mode, least-
significant bit 1 corresponds to partition 0. Value of zero is a special value; it corresponds to
sanitizing the whole media regardless of partition configuration.
For example, Value of 0xF (or 1111 binary) corresponds to sanitizing of all 4 partitions,
See Section ‎ 4 .4.4 for additional information on sanitizing partitions.
4.4.1.2 Compliance with Existing Sanitize (Purge) Standards
The interface specified in Table 10 enables defining a wide range of Sanitize procedures.
11
Execute the default Sanitize procedure.
Erase the media (Security Erase).
USA-AF AFSSI 5020
Erase the media and overwrite with random
data.
USA Navy NAVSO P-5239-26
Erase the media and overwrite with random
data, then erase again.
DoD 5220.22-M
Erase the media and overwrite with single
character, then erase again.
NSA Manual 130-2
Erase the media and overwrite with random
data 2 times, then erase and overwrite with
a character.
Value of 0x8 (or 1000 binary) corresponds to sanitizing partition number 3,
Value of 0x1 (or 0001 binary) corresponds to sanitizing partition number 0,
Value of 0x5 (or 0101 binary) corresponds to sanitizing partitions 0 and 2,
Value of 0 (or 0000 binary) corresponds to sanitizing the whole media.
Operation
Table 10: Supported Sanitizing Procedures
Product Specification and User Manual
Command
Master
0x00
0x41
0x41
0x85
0x84
0x81
0x00
0x00
0x01
0x01
Char
0x02
1
SSD (Formerly FFD) Serial ATA 2.5"
Parameter
0x00
0x00
0x00
0x00
0x00
Char
2
42-PS-0605-00 Rev. 1.3
0x00
0x00
0x00
0x00
0x00
0x00
3