RR1220P-302-B-T5 Susumu, RR1220P-302-B-T5 Datasheet - Page 14

• Manufacturer Part Number: RR1220P-302-B-T5
• Description: RES 3.0K OHM 1/10W .1% 0805 SMD
• Manufacturer: Susumu
• Series: RRr

Specifications of RR1220P-302-B-T5

• Resistance (ohms): 3K
• Power (watts): 0.1W, 1/10W
• Composition: Thin Film
• Temperature Coefficient: ±25ppm/°C
• Tolerance: ±0.1%
• Size / Dimension: 0.079" L x 0.049" W (2.00mm x 1.25mm)
• Height: 0.016" (0.40mm)
• Lead Style: Surface Mount (SMD - SMT)
• Package / Case: 0805 (2012 Metric)
• Resistance In Ohms: 3.00K
• Case: 0805 (2012 metric)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Other names: RR1220P-302-B; RR1220P302B; RR12P3.0KBTR

TITLE:
(4) Resistors shall be used within rated range shown in specification.
(5) In case that resistor is loaded a rated voltage, it is necessary to confirms temperature of a resistor and to
(6) Observe Limiting element voltage and maximum overload voltage specified in each specification.
(7) If there is a possibility that a large voltage (pulse voltage, shock voltage) charge to resistor, It is necessary
8.5 Using and Handling
Refer to EIAJ RCR-2121 -- Electronic Industries Association of Japan technological report "Fixed resistor
directions guideline.”
Especially, if voltage more than specified value will be loaded to resistor, there is a case it will make
damage for machine because of temperature rise depending on generation of heat, and increase resistance
value or breaks.
reduce a load power according to load reduction curve, because a temperature rise of a resistor depends
on influence of heat from mounting density and neighboring element.
that operating condition shall be set up before use, because performance of thin film resistor is affected
by a large shock voltage.
Chip resistor RR1220 series
Specification for
SUSUMU
CO.,LTD
SPEC.NO:
RR00-1097
Rev. No.
14/14
0