E3X-DA8-S Omron, E3X-DA8-S Datasheet - Page 20

• Manufacturer Part Number: E3X-DA8-S
• Description: RED LED PNP CONN PTUNE
• Manufacturer: Omron
• Series: E3X-DA-Sr

Specifications of E3X-DA8-S

• Amplifier Type: Standard
• Voltage - Supply: 12 V ~ 24 V
• Output Type: PNP
• Current - Supply: 40mA
• Mounting Type: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: E3XDA8S

*1. Input Specifications
*2. Communications are disabled if the detection mode is selected during super-high-speed mode, and the communications functions for mutual interference prevention
*3. PNP output is as follows: Operate: 53 s, reset: 55 s.
*4. When counter is enabled: 80 s for operate and reset respectively.
*5. When differential output is selected for the output setting, the second channel output is 200 s for operation and reset respectively.
*6. Mutual interference prevention can be used for only up to 6 Units if power tuning is enabled.
*7. Mutual interference prevention can be used for up to 5 Units (10 channels) if power tuning is enabled.
Item
Light source (wavelength) Red LED (635 nm)
Power supply voltage
Power consumption
Con-
trol
output
Remote control input
Protection circuits
Re-
sponse
time
Sensitivity setting
Func-
tions
NPN
PNP
and the Mobile Console will not function.
ON/OFF output
Analog output
Super-high-
speed mode
High-speed
mode
Standard mode
High-resolution
mode
Power tuning
Differential de-
tection
Timer function
Automatic pow-
er control (APC)
Zero-reset
Initial reset
Mutual interfer-
ence prevention
Counter
ON: Shorted to 0 V (sourcing current: 1 mA max.).
OFF: Open or shorted to Vcc.
ON: Shorted to Vcc (sinking current: 3 mA max.).
OFF: Open or shorted to 0 V.
Model
Type
12 to 24 VDC 10%, ripple (p-p) 10% max.
1,080 mW max. (current consumption: 45 mA max. at power supply voltage of 24 VDC)
Load power supply voltage: 26.4 VDC; NPN/PNP open collector;
load current: 50 mA max.; residual voltage: 1 V max.
No-voltage input (contact/non-contact) *1
Reverse polarity for power supply connection, output short-circuit
Operate: 48 s,
reset: 50 s *2, *3, *4
Operate or reset: 250 s
Operate or reset: 1ms
Operate or reset: 4ms
Teaching or manual method
Light emission power and reception gain, digital control method
Switchable between single edge and double edge detection mode
Single edge: Can be set to 250 s, 500 s, 1 ms, 10 ms, or 100 ms.
Double edge: Can be set to 500 s, 1 ms, 2 ms, 20 ms, or 200 ms.
Select from OFF-delay, ON-delay, or one-shot timer.
1 ms to 5 s (1 to 20 ms set in 1-ms increments, 20 to 200 ms set in 10-ms increments, 200 ms to 1 s set in 100-ms
increments, and 1 to 5 s set in 1 s-increments)
High-speed control method for emission current
Negative values can be displayed. (Threshold value is shifted.)
Settings can be returned to defaults as required.
Possible for up to 10 Units *6
Switchable between
up counter and down
counter.
Set count:
0 to 9,999,999
External input mod-
Contact input (relay or switch)
E3X-DA@RM-S
els
Operate or reset:
80 s *2
Twin output mod-
E3X-DA@TW-S
els
---
Advanced models
Operate or reset:
130 s *2
ATC function mod-
E3X-DA@AT-S
ON: 1.5 V max. (sourcing current: 1 mA max.)
OFF: Vcc - 1.5 V to Vcc (leakage current: 0.1 mA max.)
ON: Vcc - 1.5 V to Vcc (sinking current: 3 mA max.)
OFF: 1.5 V max. (leakage current: 0.1 mA max.)
els
Non-contact input (transistor)
---
Control output
Voltage output: 1 to
5 VDC
(Connection load
10 k min.)
Temperature charac-
teristics
0.3%F.S./ C
Response speed/re-
peat accuracy
Super-high-speed
mode:
80 s/1.5%F.S.
High-speed mode:
250 s/1.5%F.S.
Standard mode:
1 ms/1%F.S.
High-resolution mode:
4 ms/0.75%F.S.
Operate or reset:
80 s *2
Analog output mod-
E3X-DA@AN-S
els
E3X-DA-S/MDA
---
Operate or reset:
130 s *2, *5
Operate or reset:
450 s
Possible for up to 9
Units (18 channels) *7
2-channel models
E3X-MDA@
---
6