Rev 2.1 ©2010 Advanced Linear Devices, Inc. 415 Tasman Drive, Sunnyvale, CA 94089-1706 Tel: (408) 747-1155 Fax: (408) 747-1286
GENERAL DESCRIPTION
The ALD1702A/ALD1702B/ALD1702/ALD1703 is a monolithic opera-
tional amplifier intended primarily for a wide range of analog applications
in +5V single power supply and ±5V dual power supply systems as well
as +4V to +10V battery operated systems. All device characteristics are
specified for +5V single supply or ±2.5V dual supply systems. It is
manufactured with Advanced Linear Devices' enhanced ACMOS silicon
gate CMOS process.
The ALD1702A/ALD1702B/ALD1702/ALD1703 is designed to offer a
balanced trade-off of performance parameters providing a wide range of
desired specifications. It has been developed specifically with the 5V
single supply or ±2.5 dual supply user in mind and offers the industry
pin configuration of µA741 and ICL7611 types.
Several important characteristics of the device make many applications
easy to implement for these supply voltages. First, the operational
amplifier can operate with rail to rail input and output voltages. This
feature allows numerous analog serial stages to be implemented without
losing operating voltage margin. Second, the device was designed to
accommodate mixed applications where digital and analog circuits may
work off the same 5V power supply. Third, the output stage can drive
up to 400pF capacitive and 5KΩ resistive loads in non-inverting unity
gain connection and double the capacitance in the inverting unity gain
mode.
These features, coupled with extremely low input currents, high voltage
gain, useful bandwidth of 1.5MHz, slew rate of 2.1V/µs, low power
dissipation, low offset voltage and temperature drift, make the ALD1702A/
ALD1702B/ALD1702/ALD1703 a truly versatile, user friendly, operational
amplifier.
The ALD1702A/ALD1702B/ALD1702/ALD1703 is designed and
fabricated with silicon gate CMOS technology, and offers 1pA typical
input bias current. On-chip offset voltage trimming allows the device to
be used without nulling in most applications. The device offers typical
offset drift of less than 7µV/°C which eliminates many trim or temperature
compensation circuits. For precision applications, it is designed to settle
to 0.01% in 8µs. Additionally, robust design and rigorous screening make
this device especially suitable for operation in temperature-extreme
environments and rugged conditions.
ORDERING INFORMATION (“L” suffix denotes lead-free (RoHS))
* Contact factory for leaded (non-RoHS) or high temperature versions.
0°C to +70°C
8-Pin
Small Outline
Package (SOIC)
ALD1702ASAL
ALD1702BSAL
ALD1702SAL
ALD1703SAL
A
L
D
INEAR
DVANCED
EVICES,
Operating Temperature Range
I
5V RAIL-TO-RAIL PRECISION OPERATIONAL AMPLIFIER
NC.
0°C to +70°C
8-Pin
Plastic Dip
Package
ALD1702APAL
ALD1702BPAL
ALD1702PAL
ALD1703PAL
-55°C to 125°C
8-Pin
CERDIP
Package
ALD1702ADA
ALD1702BDA
ALD1702DA
ALD1703DA
www.aldinc.com
FEATURES
• Rail-to-rail input and output voltage ranges
• All parameters specified for +5V single
• High load capacitance capability --
• No frequency compensation required --
• Extremely low input bias currents --
• Ideal for high source impedance applications
• Dual power supply ±2.5V to ±5.0V operation
• Single power supply +5V to +10V operation
• High voltage gain -- typically 85V/mV
• Drive as low as 2KΩ load with 5mA
• Output short circuit protected
• Unity gain bandwidth of 1.5MHz (1MHz min.)
• Slew rate of 2.1V/µs (1.4V/µs min.)
• Low power dissipation
• Suitable for rugged, temperature-extreme
PIN CONFIGURATION
APPLICATIONS
• Voltage amplifier
• Voltage follower/buffer
• Charge integrator
• Photodiode amplifier
• Data acquisition systems
• High performance portable instruments
• Signal conditioning circuits
• Sensor and transducer amplifiers
• Low leakage amplifiers
• Active filters
• Sample/Hold amplifier
• Picoammeter
• Current to voltage converter
• Coaxial cable driver
supply or ±2.5V dual supply systems.
4000pF typical
unity gain stable
1.0pA typical (30pA max.)
@ ±2.5V and 250V/mV @ ±5.0V
drive current
environments
N/C
+IN
* N/C pins are internally connected. Do not connect externally.
-IN
V -
2
3
4
1
SAL, PAL, DA PACKAGES
2
ALD1702A/ALD1702B
TOP VIEW
ALD1702/ALD1703
8
6
5
7
OUT
N/C
N/C
V +