T-55621D175J-LW-A-AAN Optrex America Inc, T-55621D175J-LW-A-AAN Datasheet - Page 24

• Manufacturer Part Number: T-55621D175J-LW-A-AAN
• Description: LCD TFT 17.5" WXGA 1280X768
• Manufacturer: Optrex America Inc

Specifications of T-55621D175J-LW-A-AAN

• Display Type: TFT - Color LCD
• Display Mode: Transmissive
• Viewing Area: 380.20mm L x 228.10mm W
• Backlight: LED - White
• Dot Pitch: 0.30mm x 0.30mm
• Dot Pixels: 1280 x 768
• Interface: LVDS
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Dot Size: -

OPTREX confidential
(3) PRECAUTIONS WITH ELECTROSTATICS
(4) STORAGE PRECAUTIONS
(5) SAFETY PRECAUTIONS
(2) OPERATING PRECAUTIONS
LCD should be stored in the room temperature environment with normal humidity. The LCD
inventory should be processed by first-in first-out method.
j. Be sure to connect the cables and the connecters correctly.
a. This LCD module use CMOS-IC on circuit board and TFT-LCD panel, and so it is easy to be
b. Please remove protection film very slowly from the surface of LCD module to prevent from
a. When you waste damaged or unnecessary LCDs, it is recommended to crush LCDs into pieces
b. If any liquid leaks out of a damaged glass cell and comes in contact with the hands, wash off
c. Be sure to turn off the power supply when inserting or disconnecting the LED backlight cable.
d. LED driver should be designed carefully to limit or stop its function when over current is
a. Please be sure to turn off the power supply before connecting and disconnecting signal input
b. Please do not change variable resistance settings in LCD module. They are adjusted to the most
c. The interface signal speed is very high. Please pay attention to transmission line design and
d. A condensation might happen on the surface and inside of LCD module in case of sudden change
e. Please pay attention not to display the same pattern for very long time. Image might stick on
f. Please obey the same safe instructions as ones being prepared for ordinary electronic products.
and wash them off with solvents such as acetone and ethanol, which should later be burned.
thoroughly with soap and water.
cable.
suitable value. If they are changed, it might happen LCD does not satisfy the characteristics
specification.
other high speed signal precautions to satisfy signal specification.
of ambient temperature. Please take care so as not to cause any damage mentioned on (1)-d.
LCD. Even if image sticking happens, it may disappear as the operation time proceeds.
affected by electrostatics. Please be careful with electrostatics by the way of your body
connecting to the ground and so on.
electrostatics occurrence.
detected on the LED.
(24/25)
T-55621D175J-LW-A-AAN_02_00