GLK24064-25-FGW-V Matrix Orbital, GLK24064-25-FGW-V Datasheet - Page 11

• Manufacturer Part Number: GLK24064-25-FGW-V
• Description: LCD GRAPHIC DISPL 240X64 WHT BLU
• Manufacturer: Matrix Orbital
• Series: GLK24064-25r

Specifications of GLK24064-25-FGW-V

• Display Type: LCD - Color
• Display Mode: Transmissive
• Viewing Area: 132.00mm L x 39.00mm W
• Backlight: LED - White
• Dot Size: 0.49mm W x 0.49mm H
• Dot Pitch: 0.53mm x 0.53mm
• Dot Pixels: 240 x 64
• Interface: I²C, RS232, TTL
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: GLK24064-25-GW-V; GLK24064-25-GW-V

The GLK24064-25-USB/GLT24064-USB offers a single USB protocol for easy connection to a host
computer. The simple and widely available protocol can be accessed using the on board mini B style
USB connector as outlined in the USB Connections section.
Recommended Parts
USB Connections
The USB connection is the quickest, easiest solution for PC development. After driver installation, the
GLK24064-25-USB/GLT24064-USB will be accessible through a virtual serial port, providing the same
result as a serial setup without the cable hassle. To connect to your GLK24064-25-USB/GLT24064-USB,
please follow the steps below.
1. Set the Protocol Select jumpers.
2. Make the connections.
3. Install the drivers.
4. Create.
5
2.4 USB Module
Figure 5: Mini USB Cable


a.
b.
c.
d.
e.
f.

(EXTMUSB3FT)
USB: The GLK24064-25-USB/GLT24064-USB offers USB protocol only. Model specific hardware
prevents this unit from operating in any other protocol, and does not allow other models to
operate in the USB protocol. Protocol Select jumpers on the USB model cannot be moved.
Plug the mini-B header of your External Mini USB cable into your GLK24064-25-USB/GLT24064-
USB and the regular USB header into your computer USB jack. Additional power may be
required, especially for YG displays, and can be supplied to the Alternate Power Connector.
Use MOGD# or hyperterminal to get started, and then move on with your own development.
Instructions for these programs can be found below and a number of application notes are
available at www.matrixorbital.ca/appnotes.
Download the latest drivers at www.matrixorbital.ca/drivers, and save them to a known
location.
When prompted, install the USB bus controller driver automatically
If asked, continue anyway, even though the driver is not signed
When the driver install is complete, your display will turn on, but communication will not yet be
possible.
At the second driver prompt, install the serial port driver automatically
Again, if asked, continue anyway
The External Mini USB cable is recommended for the GLK24064-25-USB
/GLT24064-USB display. It will connect to the mini-B style header on the
unit and provide a connection to a regular A style USB connector, commonly
found on a PC.