78M6612-DB/OMU-RF Maxim Integrated Products, 78M6612-DB/OMU-RF Datasheet - Page 110

• Manufacturer Part Number: 78M6612-DB/OMU-RF
• Description: KIT DEMO OUTLET MEAS OMU1-S-RF
• Manufacturer: Maxim Integrated Products

Specifications of 78M6612-DB/OMU-RF

• Main Purpose: *
• Embedded: *
• Utilized Ic / Part: *
• Primary Attributes: *
• Secondary Attributes: *
• Processor To Be Evaluated: 78M6612
• Data Bus Width: 8 bit
• Interface Type: UART
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

78M6612 Data Sheet
Revision History
© 2009 Teridian Semiconductor Corporation. All rights reserved.
Teridian Semiconductor Corporation is a registered trademark of Teridian Semiconductor Corporation.
Simplifying System Integration is a trademark of Teridian Semiconductor Corporation.
MicroDAA is a registered trademark of Teridian Semiconductor Corporation.
All other trademarks are the property of their respective owners.
Teridian Semiconductor Corporation makes no warranty for the use of its products, other than expressly
contained in the Company’s warranty detailed in the Teridian Semiconductor Corporation standard Terms
and Conditions. The company assumes no responsibility for any errors which may appear in this
document, reserves the right to change devices or specifications detailed herein at any time without
notice and does not make any commitment to update the information contained herein. Accordingly, the
reader is cautioned to verify that this document is current by comparing it to the latest version on
http://www.teridian.com or by checking with your sales representative.
110
Revision
1.0
1.1
1.2
Date
4/1/2009
5/6/2009
6/11/2009
Description
First publication.
Replaced
Miscellaneous editorial corrections.
In
“CE6612_OMU_S2_A01_V1_2”.
In
“I2_SHUNT”. Also changed “W0SUM_X” to “W1SUM_X” and “W1SUM_X” to
“W2SUM_X”.
In
“W2SUM_X”. Also changed “VAR0SUM_X” to “VAR1SUM_X” and
“VAR1SUM_X” to “VAR2SUM_X”.
In
to “I2SQSUM_X”. Changed the CE Address of WSUM_ACCUM from “0x7D” to
“0x1B”. Added CE Address 0x7C, V3SQSUM_X. Deleted CE Address 0x7E,
VSUM_ACCUM.
In
0x19.
In
“element 2”. Changed “element A” to “element 1” and “element B” to
“element 2”. Also changed “I0SQSUM” to “I1SQSUM” and “I1SQSUM” to
“I2SQSUM
In
In Section 7.3, changed “CKOUT_EN” to “
Section
Section
Section
Section
Section
Section
Figure
43, changed pin 65 from “PB” to “GNDD”.
”.
Figure 39
4.4.1, changed “CE6612_OMU_S2_A01_V1_0” to
4.4.6, changed “I0_SHUNT” to “I1_SHUNT” and “I1_SHUNT” to
4.4.7.1, changed “W0SUM_X” to “W1SUM_X” and “W1SUM_X” to
4.4.7.2, changed “I0SQSUM_X” to “I1SQSUM_X” and “I1SQSUM_X”
4.4.7.3, changed the CE Address for GAIN_ADJ from 0x18 to
4.4.7.6, changed “element 0” to “element 1” and “element 1” to
with improved performance data.
CKOUT_E[1:0]
”.
DS_6612_001
Rev. 1.2