RNA4A8E510JT AVX Corporation, RNA4A8E510JT Datasheet - Page 3

• Manufacturer Part Number: RNA4A8E510JT
• Description: RES ARRAY 51 OHM 5%
• Manufacturer: AVX Corporation
• Series: RNA4A, Kyocerar

Specifications of RNA4A8E510JT

• Resistance (ohms): 51
• Number Of Resistors: 8
• Circuit Type: Bussed
• Tolerance: ±5%
• Power Per Element: 62.5mW
• Number Of Pins: 10
• Package / Case: 1608 (4021 Metric), Concave
• Size / Dimension: 0.157" L x 0.083" W (4.00mm x 2.10mm)
• Height: 0.024" (0.60mm)
• Mounting Type: Surface Mount
• Operating Temperature: -55°C ~ 125°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Circuit design
1) Once application and assembly environments have been checked,
2) Please consult the manufacturer in advance when the resistors is
3) Please use the resistors in conformance with the operating
4) Please keep voltage under the rated voltage which is applied to the
5) Do not use the resistor in an environment where it might easily
6) Please do not use the resistor in the following environments.
7) There is a thing that resistance changes according to the stuff of
8) There is a thing that resistance changes according to flux and
9) Please consult about a lead free products.
Storage
1) Keep storage place temperature +5 to +35°C, humidity 45 to 75%
2) Please keep parts out of poisonous gas such as sulfur or chlorine
3) Soldering iron
*Do not place the soldering iron on the chip. Soldering iron is 30W max.
Temperature
Time
the resistors may be used in conformance with the catalog and the
specifications.
used in devices such as: devices which deal with human life, i.e.
medical devices; devices which are highy public orientated; and
devices which demand a high standerd of liability.
temperature provided in both the catalog and the specifications.
resistor.
exceed the respective provisions concerning shock and vibration
specified in the catalog and specifications.
①
②
③
the resin when the coating with the resin is given.
Please use resin coating after confirming the characteristic.
cleaner.
Please use flux and cleaner after confirming the characteristic.
RH.
in the air and out of salty moisture, or they may cause rust of
terminal and poor solderability. Please consider the above-
mentioned item after mounting.
Precautions
 S tate that water, oil, and solvent hang in resistor
 S tate where poisonous gas (sulfur and chlorine, etc.) exists
 S tate that direct sunshine, radiation, and ultraviolet, etc. are irradiated
soldering iron 300±5°C *
3 sec. max.
*
Soldering method
1) Recommendable temperature profile
2) Recommendable temperature profile
3) Pb-free recommendable temperature profile
°
±
∆
∆
°
±
°