XB24-DK Digi International/Maxstream, XB24-DK Datasheet - Page 7

• Manufacturer Part Number: XB24-DK
• Description: KIT DEV ZIGBEE
• Manufacturer: Digi International/Maxstream
• Series: XBee™r
• Type: 802.15.4/Zigbeer

Specifications of XB24-DK

• Contents: OEM Modules, Interface Boards, Cables, Battery Clip, Adapters and Software
• For Use With/related Products: XBee and XBee Pro Radios
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Wired Uploads
You can upload an application via serial port or over the air using any XModem program. This
example explains how to upload an app over the serial port using the XModem function built
into X-CTU.
You can upload using the bootloader via the USB com port by:
4. Next click the Make button or click Project > Make from the menu bar [Fig 7] to
5. In the same path (\AppTransparent \XbeeProZBProgrammable\) that you found the
1. Make sure that the XBee-PRO ZB programmable module is still connected to your PC
2. Open an X-CTU session with 9600 baud, no parity, and 8 data bits with one stop bit.
3. Select the appropriate COM port and then click on the Terminal tab.
4. Click on the XModem menu item. A separate window will pop up.
5. Click Open File and browse to the desired flat binary output (bin) file.
6. Click Open and the path to the selected file will populate the top box.
7. Click the main X-CTU window and hit Enter or Space to display the bootloader menu.
8. Hit the F key to initiate a wired firmware update. A series of ‘C’ characters will be
compile your application.
App32Transparent.mcp file you will find a Bin folder. This is where your compiled bin
file will be found. In this case it is named App32T.abs.bin.
via the USB cable.
displayed within the terminal window.
Figure 7: Open the Application File
7