DVK-PRM122 Laird Technologies, DVK-PRM122 Datasheet - Page 22

• Manufacturer Part Number: DVK-PRM122
• Description: DEV KIT PRM122
• Manufacturer: Laird Technologies
• Series: FlexRF™r
• Type: Transceiver, FHSSr

Specifications of DVK-PRM122

• Frequency: 2.4GHz
• Output Power: 50 mW
• Antenna: U.FL Coaxial
• Silicon Manufacturer: Laird Technologies
• Kit Application Type: Communication & Networking
• Application Sub Type: Wireless Module
• Features: Very Robust In The Presence Of Interference Global
• Rohs Compliant: Yes
• For Use With/related Products: PRM122
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

LT2510
Wireless Module
EEPROM
PARAMETERS
19 www.lairdtech.com
TABLE 9: EEPROM PARAMETERS (CONTINUED)
PARAMETERS
Broadcast
Attempts
Utility Retries
RF Profile
Control 1
ADDRESS
EEPROM
0x4D
0x4E
0x54
0x56
LENGTH
(BYTES)
1
1
1
1
Description
0x00-0xFF
RANGE
0x01-
0x01-
* See
0xFF
0xFF
DEFAULT
0x03
0x03
0x40
Settings are: bit-7: Auto Destination on Beacons only
attempts used to transmit a Remote I/O line status change.
Used by Remote I/O mode to increase the odds of delivery
of a Remote I/O line update. Sets the number of retries or
RF Profile
0x00
0x01
0x03
Number of times each packet is transmitted when
Note:
Superseded RF Data Rate (Addresses 0x51-0x53)
A setting of 0x00 will select 256 attempts.
Broadcast packets are being sent.
(only functional when Auto Destination is
also enabled)
bit-6: Disable Hop Frame
bit-5: Reserved
bit-4: Auto Destination
bit-3: Client Auto Channel
bit-2: RTS
bit-1: Duplex
bit-0: Auto Config
RF Data Rate
500Kbps
280Kbps
280Kbps
0 = Disable - Radio will set destination
based on any received packet
1 = Enable - Radio will set destination
based only on the beacon from the Server
0 = Disable (Turns on Hop Frame Pin)
1 = Enable (Turns off Hop Frame Pin)
0 = Use Destination Address
1 = Use Auto Destination
0 = Disable Auto Channel
1 = Enable Auto Channel
0 = Disable RTS handshaking
1 = Enable RTS handshaking
0 = Half Duplex
1 = Full Duplex
0 = Auto Config Disabled
1 = Auto Config Enabled
in FW v1.3 and beyond.
DESCRIPTION
Number of Hops
43
79
43
Laird Technologies
PRM110/111/120/121
PRM112/113/122/123
any PRM1xx product.
For FCC Markets only
Can be selected on
default setting for
default setting for
international use.
This is the
This is the
Valid for
Details