F2M03AC2-KIT 2 Free2Move, F2M03AC2-KIT 2 Datasheet - Page 4

• Manufacturer Part Number: F2M03AC2-KIT 2
• Description: KIT EVALUATION DUAL AC2
• Manufacturer: Free2Move
• Type: Bluetoothr

Specifications of F2M03AC2-KIT 2

• Frequency: 2.4GHz
• For Use With/related Products: F2M03AC2 Modules
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 647-1004

3 Getting Started with Wireless UART firmware
To use the Bluetooth serial profile, Free2move provides the Bluetooth modules with its Wireless UART
firmware.
•
•
•
•
4 Evaluation board interfaces
The evaluation board includes some external interfaces.
4.1
Use the included 5VDC adapter to supply power to the connector J4. Polarity of power does not matter.
4.2
The JP1 is a DB-9 RS-232 connector. Pin out is according to the specification below.
Pin
1
2
3
4
5
6
7
8
9
4.3
There are six buttons and six LEDs connected to six different PIO lines of the module. The buttons are
active high i.e. when it is pressed 3V is applied to the corresponding input of the module.
The LEDS are mainly intended t show the status of outputs and the buttons to control inputs.
There is a label for each button and LED declaring which I/O they are connected to.
The functionality of the PIO lines differs depending on which firmware version is used. Information about
this functionality is included in firmware datasheet (e.g. the Wireless UART datasheet)
Install the Free2move Configuration software, included on the CD, on your computer running windows
(Windows 2000 or later is preferred).
Connect the Evaluation board to your computer by using the serial cable.
Connect the 5VDC adapter included or any other power supply delivering +5V/400mA to the power
supply connector J4. There is no need to get the polarity right on the supplied power.
Start the Configuration software. More information about the configuration software and Wireless UART
is included on the CD.
CD
TxD
RxD
DSR
GND
DTR
CTS
RTS
Vcc Power
Power supply
RS-232
Buttons
RS-232 signal
Not connected
Output
Input
Not connected
Not connected
Input
Output
Input 4-5V
Direction
© 2003 Free2move AB
Evaluation board connector (female)
5
9
4
8
Rev: 24 February 2005
3
7
2
6
1
Page 4(8)