MODULE BT CLASS 1 W/ANT HCI FW

WML-C40AH

Manufacturer Part NumberWML-C40AH
DescriptionMODULE BT CLASS 1 W/ANT HCI FW
ManufacturerBlueRadios Inc
WML-C40AH datasheet
 


Specifications of WML-C40AH

Frequency2402MHz ~ 2480MHzData Rate - Maximum721kbps
Modulation Or ProtocolFHSS, GFSKPower - Output12dBm
Sensitivity-83dBmVoltage - Supply3.3V
Current - Receiving40mACurrent - Transmitting80mA
Data InterfacePCB, Surface MountAntenna ConnectorOn-Board, Chip
Operating Temperature-40°C ~ 70°CPackage / CaseModule
Lead Free Status / RoHS StatusLead free / RoHS CompliantApplications-
Memory Size-Other names822-1011
1
Page 1
2
Page 2
3
Page 3
4
Page 4
Page 1/4

Download datasheet (299Kb)Embed
Next
®
Bluetooth
Module
BR-C40# Class1, Class2, and Class3 Bluetooth
OUTLINE
AT HOME. AT WORK. ON THE ROAD.
MEANS TOTAL FREEDOM FROM THE CONSTRAINTS AND CLUTTER OF WIRES IN
YOUR LIFE.
Wireless communications module certified to Bluetooth
Two types of models: With/without ceramic RF chip antenna provided.
®
FCC, IC, CE, RoHS, and Bluetooth
certified ISM 2.4GHz band module.
UART data interface (2-wire or 4-wire with CTS/RTS).
13-bit PCM, 8k samples/s, synchronous bidirectional audio interface
Includes integrated software stack, profiles, and AT modem like commands.
Embedded Bluetooth Stack Profiles Included (requires no host MCU stack):
SPP, DUN, LAN, Headset, HFP, eSCO, SCO, Audio Gateway, FTP Client/Server, OBEX,
OPP – Push/Pull, GAP SDP, RFCOMM, and L2CAP protocols.
FEATURES
The BlueRadios serial radio modems can be configured, commanded, and controlled through
simple ASCII strings over the Bluetooth RF link or directly through the hardware serial UART.
Dedicated PCM voice channel for audio applications, and eSCO for exceptional audio clarity
UART baud rate speeds: 1200bps up to 921.6Kbps, and customized
+100 meter (330 feet) distance
Software adjustable transmitter power from short to long range applications
Low power consumption (80mA TX, 40mA RX, 1.4mA idle mode, and 30uA deep sleep)
Small-form factor SMT radio modem
Operating temperature range: -40~+70ºC.
Secure and robust communication link
FHSS (Frequency Hopping Spread Spectrum)
Encryption and 16 alphanumeric Personal Identification Number (PIN)
Error correction schemes for guaranteed packet delivery
SPECIFICATIONS
Item
Frequency
Modulation
Channel intervals
Number of channels
Power supply voltage
Current consumption
Transmission rate (over the air)
Receive sensitivity
Output level (variable)
Without antenna
Dimensions
With antenna
7173 S. Havana Street, Suite 600
Secure, Versatile
and Award Winning
USING BLUETOOTH WIRELESS TECHNOLOGY
®
ver2.0.
3.3Vdc + 0.1V and < 10mVp-p noise
13.2(W)X18.8(L)X2.05(H)mm
13.2(W)X24.8(L)X2.05(H)mm
Englewood, CO 80112
www.BlueRadios.com
Network Radio Devices.
®
ver2.0
Specifications
2402 ~ 2480MHz
FHSS/GFSK
1MHz
79CH
120mA worst case peak
721kbps
-83dBm typ.
12dBm max.
USA
Tel (303) 957-1003

WML-C40AH Summary of contents

  • Page 1

    Bluetooth Module BR-C40# Class1, Class2, and Class3 Bluetooth OUTLINE AT HOME. AT WORK. ON THE ROAD. MEANS TOTAL FREEDOM FROM THE CONSTRAINTS AND CLUTTER OF WIRES IN YOUR LIFE. Wireless communications module certified to Bluetooth Two types of models: ...

  • Page 2

    ... DIMENSIONS BR-C40N (Without Antenna) make from WML-C40NH Note: SPI is for BlueRadios internal use only. Part is not 5Vdc tolerant. Reset is active low; pulse >5msec. Unused pins can float accept for PIO(4), tie to ground if not used or disable via software. Power-up Sequence The module must be reset with terminal 5 “RESET” after turning on the power supply VDD. Reset terminal should be low for > ...

  • Page 3

    ... BR-C40A (With Antenna) make from WML-C40AH Note: SPI is for BlueRadios internal use only. Part is not 5Vdc tolerant. Reset is active low; pulse >5msec. PIO Sink Current is 4mA max. Unused pins can float accept for PIO(4), tie to ground if not used or disable via software. ...

  • Page 4

    ... BR-C40N (Without Antenna) make from WML-C40NH BR-C40A (With Antenna) make from WML-C40AH Note: Radio requires a RF ground plane on the rest of the Printed Circuit Board (PCB) area. This can be located on any layer of the PCB. Extend the RF ground plane parallel to module pins 1 and 24 the entire length of your board ...