F2M03GXA-S01 Free2Move, F2M03GXA-S01 Datasheet - Page 9

• Manufacturer Part Number: F2M03GXA-S01
• Description: MOD BLUETOOTH V2.0+EDR EXT W/ANT
• Manufacturer: Free2Move

Specifications of F2M03GXA-S01

• Frequency: 2.4GHz
• Data Rate - Maximum: 3Mbps
• Modulation Or Protocol: Bluetooth v2.0+EDR, Class 1, 2 & 3
• Applications: Bluetooth v2.0
• Power - Output: -8dBm ~ 18dBm
• Sensitivity: -92dBm
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Receiving: 38mA
• Current - Transmitting: 250mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Other names: 647-1013-2

5 Firmware versions
F2M03 is supplied with Bluetooth stack firmware, which runs on the internal RISC micro controller of the
Bluetooth module. This chapter includes an overview of the different options for more in depth information
please use separate firmware datasheets provided by Free2move.
All firmware versions are compliant with the Bluetooth specification v2.0. The F2M03 software architecture
allows Bluetooth processing to be shared between the internal micro controller and a host processor.
Depending on application the upper layers of the Bluetooth stack (above HCI) can execute on-chip or on
the host processor.
Running the upper stack on F2M03 module reduces (or eliminates, in the case of a on module application)
the need for host-side software and processing time.
The integration approach depends on the type of product being developed. For example, performance will
depend on the integration approach adopted. In general Free2move offers four categories of Bluetooth
stack firmware:
The protocol layer models for the different Bluetooth stack firmware categories can be represented as
shown in the figures below.
F2M03
•
•
•
•
Host
Wireless UART; offers a transparent interface to the Bluetooth channel. There is no need for
additional drivers or Bluetooth software on the host.
Embedded module solutions offer an application to run on the module. There is no need for an
external host (E.g. a Bluetooth headset).
Two-processor solution involving a host and host controller, where the higher layers of the
Bluetooth stack has to be implemented on the host.
Two-processor embedded solution offers a host with limited resources to gain access to a
Bluetooth stack, with the higher layers on-chip, via a special API.
Hardware
Wireless UART application (SPP)
APPLICATION INTERFACE
Wireless UART
RFCOMM
LINK MANAGER
Application
BASEBAND and RF
L2CAP
Extended range Bluetooth™ Module - F2M03GX /GXA
HCI
SDP
Manager
Device
© 2006 Free2move AB
F2M03
Host
Datasheet
Hardware
APPLICATION INTERFACE
processor architecture
Embedded single-
RFCOMM
LINK MANAGER
Application
BASEBAND and RF
L2CAP
HCI
SDP
Manager
Device
Page 9(47)
Rev: c