PIXLITE-DIL-PLFE Flexipanel, PIXLITE-DIL-PLFE Datasheet - Page 7

• Manufacturer Part Number: PIXLITE-DIL-PLFE
• Description: MODULE ZIGBEE SW FAST 24-DIP
• Manufacturer: Flexipanel
• Series: Pixie™r

Specifications of PIXLITE-DIL-PLFE

• Frequency: 2.4GHz
• Modulation Or Protocol: 802.15.4 Zigbee
• Power - Output: 0dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 25mA
• Current - Transmitting: 25mA
• Data Interface: PCB, Through Hole
• Memory Size: 32kB ROM, 1536B RAM
• Antenna Connector: On-Board, Trace
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 24-DIP Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Sensitivity: -
• Data Rate - Maximum: -
• Other names: 658-1006-5; PIXIE-LITE-PLFE

MACdongle
interface for UZBee.
FlexiPanel’s
applications.
Z-Pixie
and Pixie Lite.
Zongle
Currently it can support reduced function devices
only. It is also used by FlexiPanel’s Switcher PC
software for PC-based ZigBee switching.
Pixie Gateway
Pixie.
LinkMatik
command interface.
Toothpick Slave
Toothpick.
Toothpick Stamp Edition
for Toothpick specifically intended for accepting
commands form BASIC Stamps.
exclusively from Parallax Inc (www.parallax.com).
Transparent Interfaces
Transparent devices automatically connect at
power-up and are then ready to transfer serial.
StarLite
for Pixie and Pixie Lite. It can be configured in a
number of slave or broadcast modes.
StarLite USB
interface for UZBee.
PixieCOM
and Pixie Lite. It can be configured in a number of
slave or broadcast modes.
LinkMatik
or slave device using one-time configuration
commands.
Off-The-Shelf Applications
Many of the off-the-shelf applications are provided
complete with source code to allow them to be
customized to specific requirements.
Pixie Switcher
Pixie and Pixie Lite.
15.4 Sniffer
packet sniffing application for UZBee.
Page 7
is a ZigBee command interface for UZBee.
is a ZigBee command interface for Pixie
is a transparent IEEE 802.15.4 interface
is transparent MailBox interface for Pixie
can be turned into a transparent master
resident firmware uses a serial-based
is an IEEE 802.15.4 / ZigBee / MailBox
2-Feb-07
is an IEEE 802.15.4 command
is a ZigBee switching application for
is a MailBox command interface for
is a transparent IEEE 802.15.4
Sniffer
is a command interface for
software
is a command interface
It is also used by
RF Transceiver Selection Guide DS500-1
It is available
for
sniffer
Switcher PC
UZBee.
Pixie DARC
remote control application for Pixie and Pixie Lite,
complete with source code.
DARC-I
remote control application for Toothpick, complete
with source code.
BlueControl
Toothpick. It is normally supplied as the complete
BlueControl product, but the source code is
available on request.
DARC-II
and remote control application for Toothpick,
complete with source code.
HappyTerminal
terminal
complete with source code.
BlueLock
Toothpick. It is normally supplied as the complete
BlueLock product, but the source code is available
on request.
OpenTooth
application for Toothpick, complete with source
code.
Applications Examples
Here
appropriate hardware / firmware choices.
Serial Cable Replacement
In a serial cable replacement application, a PC
communicates wirelessly with one other remote
device.
If large amount of data is to be transferred,
consider a Bluetooth adapter on the PC and a
LinkMatik on the remote device. (Check the range
of the adapter – some are only 10m.)
If the remote device is to be battery powered,
consider StarLite USB on the PC and StarLite on
the remote device.
Bus Cable Replacement
In a bus cable replacement application, devices
communicate
are
is a command-driven data acquisition and
is a remote-client -driven data acquisition
emulator
is an access control application for
is a remote-client-driven access control
is a remote control application for
is a ZigBee switching application for
some
is a MailBox data acquisition and
is a remote-client -driven TTL-level
© FlexiPanel Ltd
wirelessly
common
application
using
applications
for
www.FlexiPanel.com
Toothpick,
broadcast
and