SRIX4K-W4/1GE STMicroelectronics, SRIX4K-W4/1GE Datasheet - Page 8

• Manufacturer Part Number: SRIX4K-W4/1GE
• Description: IC MEM 13.56MHZ 4096BIT EEPROM
• Manufacturer: STMicroelectronics
• Series: SRIX4Kr

Specifications of SRIX4K-W4/1GE

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO14443-B
• Package / Case: Wafer
• For Use With: 497-3704 - RFID EVALUATION KIT ISO14443-B
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Signal description
2
2.0.1
8/47
The SRIX4K contactless EEPROM can be randomly read and written in block mode (each
block containing 32 bits). The instruction set includes the following ten commands:
●
●
●
●
●
●
●
●
●
●
The SRIX4K memory is organized in three areas, as described in
a resettable OTP (one time programmable) area in which bits can only be switched from 1 to
0. Using a special command, it is possible to erase all bits of this area to 1. The second area
provides two 32-bit binary counters which can only be decremented from FFFF FFFFh to
0000 0000h, and gives a capacity of 4,294,967,296 units per counter. The last area is the
EEPROM memory. It is accessible by block of 32 bits and includes an auto-erase cycle
during each Write_block command.
Figure 2.
Signal description
AC1, AC0
The pads for the antenna coil. AC1 and AC0 must be directly bonded to the antenna.
Read_block
Write_block
Initiate
Pcall16
Slot_marker
Select
Completion
Reset_to_inventory
Authenticate
Get_UID
Die floor plan
AC0
AC1
AI09055
Figure
12. The first area is
SRIX4K