E8CC-A01C Omron, E8CC-A01C Datasheet - Page 5

• Manufacturer Part Number: E8CC-A01C
• Description: SENSOR PRESSURE 1-5V 0-98KPA NPN
• Manufacturer: Omron
• Series: E8CCr

Specifications of E8CC-A01C

• Pressure Type: Gauge
• Operating Pressure: 14.21 PSI, 98 kPa
• Port Size: Male, 1/8" (3.175mm) 27 NPT
• Output: Digital
• Voltage - Supply: 12 V ~ 24 V
• Termination Style: Cable
• Operating Temperature: -10°C ~ 55°C
• Package / Case: Module
• Mounting Style: DIN Rail
• Maximum Operating Temperature: + 55 C
• Minimum Operating Temperature: - 10 C
• Operating Supply Voltage: 15 V, 18 V
• Output Voltage: 1 V to 5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: E8CCA01C

I/O Circuit Diagrams
NPN Output
Safety Precautions
This product is not designed or rated for ensur-
ing safety of persons. Do not use it for such
purposes.
Do not use the product in atmospheres or environments that
exceed product ratings.
●
Diaphragm
Mounting
• If the diaphragm is damaged, the Pressure Sensor will not
• The pressure inlet has an R (PT)1/8 taper screw and an M5
• Do not apply a tightening torque higher than 3.9 N·m.
• If the Pressure Sensor is directly connected to a conduit, be
operate properly. Do not insert a screwdriver or steel wire
into the interior of the pressure-sensitive parts through the
pressure inlet.
female screw. Apply sealing tape around a screw that con-
forms to JIS Standards so that no pressure leakage will oc-
cur.
sure to apply a wrench to the pressure inlet. Do not apply
the wrench to the plastic case.
Mounting
E8CB-01C
E8CC-A01C
E8CC-B10C
E8CB-CN0C2B
E8CC-AN0C
Model
Precautions for Correct Use
Pressure port
http://www.ia.omron.com/
WARNING
Pressure
Pressure
Indicator
(kPa)
Indicator
(kPa)
Output
Output
−101, −100
Timing Charts
Setting
100, 98
Not Lit
Setting
Not Lit
OFF
980,
OFF
ON
ON
Lit
Lit
0
0
DIN Track Mounting Bracket (E8CC)
●
• Mounting
• Removing
• If no linear output is used, cut off the black lead wire and ap-
ply insulation tape to the lead wire so that it will not come in
contact with any other terminal.
1. Fit the front part onto the bracket.
2. Press the rear part onto the bracket.
3. Apply a flat-blade screwdriver to the rear hook. Then the
Wiring
Pressure Sensor can be removed with ease.
(c)Copyright OMRON Corporation 2008 All Rights Reserved.
Operation
indicator (red)
Pres-
sure
Sensor
main
circuit
1
Output Circuits
Brown
White (ON/OFF)
Black (linear output)
Blue
DIN track mounting bracket
2
Load
Load
E8CB/E8CC
3
+V
0 V
5