E8AA-M10 Omron, E8AA-M10 Datasheet - Page 4

• Manufacturer Part Number: E8AA-M10
• Description: SENSOR PRESSURE 0-1MPA .004-.02A
• Manufacturer: Omron
• Series: E8AAr
• Type: Gager

Specifications of E8AA-M10

• Pressure Type: Gauge
• Operating Pressure: 0.00014 PSI, 980 MPa
• Port Size: Male, 0.8661" (22mm)
• Output: 4 ~ 20mA
• Voltage - Supply: 12 V ~ 24 V
• Termination Style: Cable
• Operating Temperature: -10°C ~ 60°C
• Package / Case: Stainless Steel
• Pressure Range: 0 to 980KPa
• Mounting: Screw
• Pin Count: 2
• Operating Temp Range: -10C to 60C
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (typ): 15/18V
• Operating Supply Voltage (min): 12V
• Operating Supply Voltage (max): 24V
• Mounting Style: Screw
• Maximum Operating Temperature: + 60 C
• Minimum Operating Temperature: - 10 C
• Operating Supply Voltage: 15 V, 18 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Compliant
• Other names: E8AAM10

Cat. No. D069-E1-01A In the interest of product improvement, specifications are subject to change without notice.
OMRON Corporation
Industrial Automation Company
Application Sensors Division
Sensing Devices and Components Division H.Q.
Shiokoji Horikawa, Shimogyo-ku,
Kyoto, 600-8530 Japan
Tel: [phone]/Fax: [phone]
E8AA
Operation
Dimensions
Note: All units are in millimeters unless otherwise indicated.
Precautions
Correct Use
Hollow Pipe
The cord has a hollow pipe in order to keep the pressure inside the
Sensor the same as the atmospheric pressure. If the pipe is
clogged, the accuracy of the Sensor may be lowered.
Do not bend or impose a heavy weight on the output cord.
Make sure that the tip of the output cord is open and not clogged with
dust or water.
If it is necessary to cut the output cord, make sure that the tip of the
hollow pipe is not clogged.
Diaphragms
If the diaphragms are damaged, the Unit will not operate properly.
Do not insert a screwdriver or steel wire into the interior of the pres-
sure-sensitive parts.
The characteristics of the Unit will change if foreign material is stuck
to the stainless steel diaphragm.
4
E8AA-M05
E8AA-M10
This document provides information mainly for selecting suitable models. Please read the Instruction Sheet carefully for information that the
user must understand and accept before purchase, including information on warranty, limitations of liability, and precautions.
Main
circuit
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Blue
Black
Brown
Load
Output
E8AA-M05
Note: Vinyl-insulated round cord, 6 dia. with 3 cores
Mounting
The mounting screw for the pressure leading part is a PT1/4 taper
screw. Do not use any other type of screw.
Apply sealing tape to the PT1/4 screw part so that there will be no
pressure leakage.
The most suitable wrench is 22 mm in size.
Make sure that the maximum tightening torque applied to mount the
E8AA is 49 N S m (500 kgf S cm).
Do not use the E8AA for applications in which the E8AA comes into
direct contact with medical or food products.
Standard length: 2 m
E8AA-M10
(see note)
6 dia. 15 dia. 40 dia.
Printed in Japan
1204-0.2M (0498) (A)
E8AA