P51-1500-S-L-I12-4.5V SSI Technologies Inc, P51-1500-S-L-I12-4.5V Datasheet - Page 3

• Manufacturer Part Number: P51-1500-S-L-I12-4.5V
• Description: SENSOR 1500PSI M10-1.25 6H 4.5V
• Manufacturer: SSI Technologies Inc
• Series: MediaSensor™r

Specifications of P51-1500-S-L-I12-4.5V

• Pressure Type: Sealed Gauge
• Operating Pressure: 1500 PSI
• Port Size: Female, M10-1.25 6H
• Output: 0.5 ~ 4.5V
• Accuracy: ±0.5%
• Voltage - Supply: 5V
• Termination Style: Cable 1'
• Operating Temperature: -40°C ~ 105°C
• Package / Case: Stainless Steel
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Transmitters are very suitable in applications that use long
cables. There is virtually no error from voltage drop
introduced from the wire resistance when sending the signal
as
electromagnetic interference.
Some piezoresistive pressure transducers use only an
unprotected silicon sensing element.
crystalline material, which can sometimes crack under
severe cold transient environments. The MediaSensor™
pressure transducer uses an additional 316L stainless steel
convoluted diaphragm with a protective non-silicone oil to
protect the sensitive silicon sensing element from the harsh
media and
steel diaphragm not only provides for optimal water and
chemical media isolation for the silicon crystal sensing
element but can handle cold temperature transients without
sustaining damage.
Under cold transient conditions and within our operating
temperature range, the oil does not gel and acts as a buffer
for the silicon sensing element from the extreme
temperature transients found in certain applications such as
refrigeration.
SSI TECHNOLOGIES, INC.
Controls Division
2643 W. Court Street
Janesville, WI 53548-5011
Phone: [phone] Fax: [phone]
www.ssitechnologies.com
Ratiometric outputs vary as a ratio of the supply
voltage.
a
current.
MediaSensor™ Absolute, Sealed, Gage Pressure Sensors
environmental conditions. The 316L stainless
They
SSI Technologies – Application Note PS-AN2
are
also
Family Product Overview
less
Silicon is a brittle
sensitive
to
Page 3
MediaSensor™ Compensations Features
All
MediaSensor™
compensation modules are needed.
During manufacturing the Wheatstone Bridge resistive
elements are closely matched and compensated, however
an offset voltage (due to resistance differences) may still
exist. SSI MediaSensor™ compensates for this offset over
operating temperature range (refer to Table 1).
The resistance of silicon gauges is temperature dependent.
The span will shift with temperature to a final stabilized
value as it warms up.
for this span variation over operating temperature range.
1) Zero balancing (Null Offset) Calibration
2) Span Calibration
the
compensation
pressure
SSI MediaSensor™ compensates
circuitry
Copyright January 12, 2009
transducer.
SSI Technologies Inc.
All Rights Reserved
Revision 3
is
internal
No
RoHS
external
to
the