846-1P MG Chemicals, 846-1P Datasheet - Page 13

• Manufacturer Part Number: 846-1P
• Description: CARB COND GRS 1 PINT
• Manufacturer: MG Chemicals
• Type: Conductiver

Specifications of 846-1P

• Application: For lubricating switches and improving electrical connections
• Chemical Component: Carbon Black/Dimethylpolysiloxane
• Dispensing Method: Tub
• Lubricant Type: Conductive Carbon Grease
• Primary Type: Grease
• Weight: 1 Pint
• Product: Greases & Lubricants
• Size: 5 oz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: Q4158464

Rosin Flux
Rosin Flux Pen
For precision application of rosin flux, in a convenient
microtip pen format. RA type flux.
Available Sizes
Locate a Distributor www.mgchemicals.com/distributors
Flux and Flux Removers
Removing flux is a two-step process. The first step is dissolving the
flux. The second step is rinsing the dissolved flux off of the PC
board.
The rinsing step is very important because after dissolving the flux
it may appear that the solids in the flux have disappeared, but
once the flux remover has evaporated away, the solids will re-
deposit on the board as white residue.
Step 1: Dissolving the flux
If you are using flux remover in aerosol form, spray a little flux
remover onto the flux, then agitate with a hog hair cleaning brush.
If you are using our 4140 Flux Remover, you may spray it liberally,
as it is safe on your components. If you are using 413B Heavy Duty
Flux remover, you may spray it liberally on the solder side of the
board, but be careful to only apply it directly to the flux contami-
nated area if you are using it on the component side of the board,
as it will harm some components.
The 4140 is plastic safe so it may be applied liberally. Have a can
of 413B handy in case you run into a patch of burnt-on difficult to
remove flux.
How do you remove flux?
835
Catalog No.
835-100ML
835-1L
835-4L
835-P
835-P-20
• Superior fluxing ability
• Instant wetting
• After soldering, the rosin residue is
• Meets Mil. Spec. #RA 14256
• ANSI Spec. 004
• ROMI Class, J Standard
non-corrosive, non-conducting,
moisture resistant, and fungus resistant
10ml x 20 (Bulk)
125ml (4.2 oz)
10ml (0.34 oz)
1L (34 oz)
4L (1 gal)
Size
835-P
Format
Liquid
Liquid
Liquid
835
Pens
Pen
If you are using flux remover in liquid form, pour the flux remover
into a tray. If you are using 4140 Flux Remover, you may then sub-
merge the PC board into the tray, agitating the flux with a hog-hair
brush. If you are using 413B Heavy Duty Flux Remover, you should
not submerge the board into the tray, as the components will be
damaged. Instead, wet the hog-hair brush you are using by dipping it
into the tray, then use it to agitate the flux on the board. Periodically
rinse and re-wet the brush by swishing it in the flux remover.
Step 2: Rinsing the board
You must ensure that you push the dissolved flux solids off of the
board before the flux remover evaporates and the solids re-deposit.
If you are using flux remover in aerosol form, the easiest way to do
this is to hold the board vertically and liberally apply more flux
remover until you see the flux remover running off of the board.
If you have dissolved the flux by submerging the board in liquid
flux remover, just dip the board into the tray and swish the flux
remover and you should be ok. If you have been using the particu-
lar tray to dissolve flux on a number of boards, dissolved flux may
accumulate in the tray and dipping the board may actually deposit
flux solids onto the board. In this case you will want to either set
up a separate tray for rinsing, or have an aerosol can handy for rinsing.
A particularly good option for rinsing dissolved flux off of a board is
to use our 406B Super Wash. Super Wash comes in a large aerosol
can, allowing for liberal use, and it dries very rapidly. Super Wash
will rinse off un-evaporated flux remover as well as flux solids, and
the board will be dry and ready for service almost immediately
after rinsing.
HFE Super
Flux Remover
Use when a non-flammable flux remover
is required by safety regulations.
Suitable for use with rosin, non-rosin,
and no clean fluxes. May harm delicate
plastic components.
Available Sizes
4141
4GOOD CLEANING STRENGTH
4NON-FLAMMABLE
DIRECT 141B REPLACEMENT
Catalog No.
4141-340G
MG Chemicals Product Catalog
340g (12 oz)
Size
4141
Format
Aerosol
11