A22L-HW-24A-11M Omron, A22L-HW-24A-11M Datasheet

Page 1

... Projected Full guard A22-G Half guard A22-H Lighted Pushbutton Switches Model Appearance number A22-C Projected Guard A22-D Mushroom Small (30 dia.) A22-S Mushroom Medium A22-M (40 dia.) CSM_A22_DS_E_8_1 Model Appearance number Projected A22L-T Full guard A22L-G Half guard A22L-H Projected A22L-C Guard A22L-D 1 ...

Page 2

... Model Number Structure Model Number Legend ..... Shipped as a set which includes the Pushbutton, Lamp (lighted type only), and Switch. For information on combinations, refer to Ordering Information on pages (1) (2) ( (1) Type (2) Flange Shape Non-lighted Descrip- Code tion Code Description No F Flat Non-lighted symbol T Projected ...

Page 3

... Ordering Information Completely Assembled ........ Shipped as a set which includes the Pushbutton, Lamp (lighted type only), and Switch. Non-lighted (Round Type) Appearance Round/Flat type A22-F Round/Projection type A22-T Round/Full-guard type A22-G Round/Half-guard type A22-H Round/Small-size Mushroom type (30-dia. head) A22-S Round/Medium-size Mushroom type ...

Page 4

... A22L-T -24A-01A @ A22L-T -6A-11A @ A22L-T -12A-11A @ A22L-T -24A-11A @ A22L-T -6A-20A @ A22L-T -12A-20A R (red) @ A22L-T -24A-20A Y (yellow (green) A22L-T -6A-02A @ W (white) A22L-T -12A-02A @ A (blue) A22L-T -24A-02A @ A22L-T -T1-10A @ A22L-T -T2-10A @ A22L-T -T1-01A @ A22L-T -T2-01A @ A22L-T -T1-11A @ A22L-T -T2-11A @ A22L-T -T1-20A @ A22L-T -T2-20A ...

Page 5

... Illumination (self-holding) color Set @ A22L-G -6A-10A @ A22L-G -12A-10A @ A22L-G -24A-10A @ A22L-G -6A-01A @ A22L-G -12A-01A @ A22L-G -24A-01A @ A22L-G -6A-11A @ A22L-G -12A-11A @ A22L-G -24A-11A @ A22L-G -6A-20A @ A22L-G -12A-20A R (red) @ A22L-G -24A-20A Y (yellow) @ A22L-G -6A-02A G (green (white) A22L-G -12A-02A A (blue) @ A22L-G -24A-02A @ A22L-G -T1-10A @ ...

Page 6

... A22L-C -24A-11A @ A22L-C -24A-20A @ R (red) A22L-C -24A-02A Y (yellow) @ A22L-C -T1-10A G (green (white) A22L-C -T2-10A @ A (blue) A22L-C -T1-01A @ A22L-C -T2-01A @ A22L-C -T1-11A @ A22L-C -T2-11A @ A22L-C -T1-20A @ A22L-C -T2-20A @ A22L-C -T1-02A @ A22L-C -T2-02A Alternate operation Illumination (self-holding) color Set @ A22L-D -24A-10A @ A22L-D -24A-01A ...

Page 7

... Ordering Information Subassembled .......................The Pushbutton, Lamp, or Switch can be ordered separately. Use them in combination for models that are not available as assembled Units. These can also be used as inventory for maintenance parts. Non-lighted Models Pushbutton Switch Ordering set combinations: Refer to pages Lighted Models (without Voltage Reduction Unit) ...

Page 8

... A22-CB IP65 Full-guard type Half-guard type Model A22L-GR A22L-HR A22L-GG A22L-HG A22L-GY A22L-HY A22L-GW A22L-HW A22L-GA A22L-HA IP65 Square/Full-guard type Model A22L-DR A22L-DG A22L-DY A22L-DW A22L-DA ■ Specifications and dimensions: See pages 13 to 16. ■ Accessories and tools: See pages 10 to 12. ...

Page 9

... A22L-10M-T1 SPST-NC A22L-01M-T1 Standard SPST-NO + SPST-NC A22L-11M-T1 load SPST-NO + SPST-NO A22L-20M-T1 SPST-NC + SPST-NC A22L-02M-T1 *1. A DPST-NO model is shown here as an example. *2. For a model with a Voltage Reduction Unit, use the A22-24A@. Only 24-V LED lamps can be used. Ordering set combinations: Refer to pages ...

Page 10

... Cannot be used with the M22. Used to prevent dust or water from entering the Operation Unit (Pushbutton, etc.). Color: opaque Material: silicon Used for changing the Pushbutton color of the (round) Pushbutton Switches. Cannot be used, however, with Half-guard Switch- es. Material: polycarbonate resin Used when mounting three Nonlighted Switches ...

Page 11

Ordering Information Item Appearance 25-dia. Ring 30-dia. Resin Attach- ment Lock Plate Simple Protective Cover ■ Specifications: See pages 13 to 14. ■ Dimensions: See page 16. Classification Model --- A22Z-R25 Round A22Z-A30 --- A22Z-3380 --- A22Z-3700 ■ Precautions for ...

Page 12

... Used to tighten mounting nuts from the back of the panel and to replace the cap of the Lighted Emergency Switch. Used for replacing the cap of the Half- guard Pushbutton Switch. Used for removing the cap from the Pushbutton of the Square Lighted Push- button Switch. 12 ...

Page 13

Specifications Approved Standard Ratings (File No. E415 220 VAC 110 VAC Note: Only Switch Blocks and Lamp Sockets are recognized by UL. Refer to Page 10 ...

Page 14

... Rotation torque for Knob-type Selector and Key-type Selector Switches. Knob-type Selector Switches Lighted models: A22L-T A22L-G Non-lighted model: Lighted model: A22L-H A22L-C A22S A22L-D Manual reset: 30 operations/minute max. Automatic reset: 30 operations/minute max. 30 operations/minute max. 100 MΩ min. (at 500 VDC) ...

Page 15

... Nomenclature Model Structure Lock Ring The above illustration shows a lighted model. Pushbutton • Available Colors Non-lighted: Red, Green, Yellow, White, Blue, Black Lighted: Red, Green Yellow, White, Blue Lamp • Light Source LED lamp Incandescent lamp Switch • Contacts SPST-NO, SPST-NC, SPST-NO + SPST-NC, ...

Page 16

... For DPST-NO (DPST-NC) Monoblock-contact Switches 29.7 dia. 0.5 1.8 5.9 12 72.7 * Projection Type/A22-T/A22L-T 34 1.8 5.9 54.7 * 40-dia. Mushroom Type/A22-M 34 1.8 5.9 54.7 * Square/Full-guard Type/A22-D/A22L-D 34 1.8 5.9 54.7 * A22 (Unit: mm) For SPST-NO (SPDT-NC) Alternate Operation Switches 29.7 dia. 34 0.5 1.8 5 29.7 dia. 23.9 dia. ...

Page 17

Dimensions Terminal Arrangement (Bottom View) Non-lighted (SPST-NO + SPST-NC) (SPST-NO + SPST-NC) 20.7 16.7 M3.5 screw Switch Blocks Terminal Connection Item Terminal connection BOTTOM VIEW 1 Non-lighted (SPST-NO + SPST-NC) 2 BOTTOM VIEW 11 Non-lighted (DPST- DPST-NC) 22 ...

Page 18

Dimensions Accessories Legend Plate Frames Standard Models A22Z-332@ 27 8.3 40.8 30.3 15 2.8 29.8 Lamp LED A22-6@, 12@, 24@ 20 ± 1.5 Model indication Lock Ring A22Z-3360 2 1 20.5 30 dia. Color Cap A22Z-30T@ 23.4 dia. Caps A22 ...

Page 19

Dimensions Sealing Caps For Flat Models A22Z-3600F 32 dia. 16.6 22.2 dia. 33 dia. Metallic Bezel Rings For Flat/Projection Models A22Z-3580 28.7 dia. 24 ± 29.7 ± 0.3 dia. Snap-in Legend Plates For Standard Models A22Z-3443@-@ 26.8 For Emergency-stop Models ...

Page 20

Dimensions Lamp Extractor A22Z-3901 17.5 12.5 11 dia. 8.5 dia. Cap Tightening Tool A22Z-3908 23.4 20 Cap Puller A3PJ-5080 20 15 Simple Protective Cover A22Z-3700 47.2 2.8 57.5 20.5 56 × Tightening Wrench A22Z-3905 ...

Page 21

Dimensions Control Box (Enclosure) A22Z-B10@ A22Z-B101 (One Hole) A22Z-B101Y Four, M4 Phillips binding screws 22.1 dia. 10 (10x36) 0.6-mm 20.5 concave surface 75 A22Z-B102 (Two Holes) Four, M4 Phillips binding screws Two, 22.1 dia. (10x36) 0.6- concave surface ...

Page 22

Dimensions Control Box A22Z-B20@ A22Z-B201 (One Hole) A22Z-B201Y Four, M4 Phillips binding screws 22.1 dia. (10×36) 0.6-mm 10 20.5 concave surface 68 A22Z-B202 (Two Holes) Four, M4 Phillips binding screws Two, 22.1 dia 137 A22Z-B203 (Three Holes) Four, ...

Page 23

... Safety Precautions Refer to Safety Precautions for All Pushbutton Switches. WARNING Do not apply a voltage between the incandescent lamp and the terminal that is greater than the rated voltage. If the incandescent lamp is broken, the Operation Units may pop out. Always turn OFF the power and wait for 10 minutes before replacing the incandescent lamp ...

Page 24

... Mounting the Operation Unit on the Panel • Insert the Operation Unit (Pushbutton, etc.) from the front surface of the panel, insert the Lock Ring and the mounting nut from the terminal side, then tighten the nut. Before tightening, check that the rubber washer is present between the Pushbutton Unit and the panel. • ...

Page 25

... Mount the Color Cap so that the protrusions inside the cap fit into 1.3 the grooves in the Pushbutton Unit. Indicator • Mount the Color Cap so that the protrusions inside the Pushbutton Unit fit into the grooves in the cap. Arrow mark Lever ...

Page 26

... Square Pushbutton/Indicator • Square Pushbutton/Indicator Insert the protruding tip of the Cap Puller (A3PJ-5080) into the Cap slot, hold the plate spring, and pull them to remove the Color Cap. Plate spring • Mounting the Color Cap: Mount the Color Cap on the flange and firmly push the Color Cap. ...

Page 27

Securing the Connector Cable 1. Insert the connector into the cable port hole in the Box and secure with the fixing nut inside the box. 2. Open a hole in the thin rubber section of the rubber ring. 3. Pass ...

Page 28

Affixing Character Film • Hold the Cap, remove the cardboard on the Film, and attach the Film to the Cap. Make sure that the protruding portions of the Cap engage he cutout portions of the Film and that the characters ...

Page 29

... Mounting the 30-dia. Resin Attachment Pushbutton Rubber washer (Operation Unit mounting part) Attachment Rubber washer (included) Mounting panel Lock Ring Mounting nut A22 29 ...