A22L-TY-6A-11A Omron, A22L-TY-6A-11A Datasheet - Page 30

• Manufacturer Part Number: A22L-TY-6A-11A
• Description: SWITCH PB ILLUM RND ALT SPST YEL
• Manufacturer: Omron
• Series: A22r
• Type: Illuminatedr

Specifications of A22L-TY-6A-11A

• Circuit: DPST (1-NO, 1-NC)
• Switch Function: On-Off, Off-On
• Contact Rating @ Voltage: 10A @ 110VAC
• Actuator Type: Round Button
• Illumination Type, Color: LED, Yellow
• Illumination Voltage (nominal): 6 VAC
• Mounting Type: Panel Mount
• Termination Style: Screw Terminal
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A22LTY6A11A

Safety Precautions for All Pushbutton Switches
For the individual precautions for a Switch, refer to the Safety Precautions in the section for that Switch.
WARNING
Do not perform wiring with power supplied to the
Switch. Do not touch the terminals or other charged
parts of the Switch while power is being supplied.
Doing so may result in electric shock.
Caution
Do not apply a voltage between the incandescent lamp
and the terminal that is greater than the rated voltage.
Doing so may damage the lamp or LED and cause the
Operation Unit to pop out.
Always turn OFF the power and wait for 10 minutes
before replacing the incandescent lamp. If the lamp is
replaced immediately after the power is turned OFF,
the remaining heat may cause burns.
Precautions for Correct Use
For details, refer to the Precautions for Correct Use in the
Technical Guide for Pushbutton Switches.
C-1
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.