1241.6824.1122000 Schurter Inc, 1241.6824.1122000 Datasheet - Page 13

• Manufacturer Part Number: 1241.6824.1122000
• Description: SW MSM19 RI 12A @250VAC 2P GRN
• Manufacturer: Schurter Inc
• Series: MSM LAr
• Type: Vandal Resistant, Illuminatedr

Specifications of 1241.6824.1122000

• Circuit: DPST
• Switch Function: On-Off
• Contact Rating @ Voltage: 12A @ 250VAC
• Actuator Type: Round Button
• Illumination Type, Color: LED, Green
• Illumination Voltage (nominal): 24 VDC
• Mounting Type: Panel Mount
• Termination Style: Quick Connect - .187" (4.7mm)
• Contact Rating: 0.4 Amp at 20 Volts
• Body Style: Micro
• Current, Rating: 12 A
• Ip Rating: IP 67
• Material, Base: Stainless Steel
• Mounting Hole Size: 19 mm
• Special Features: Illuminated
• Standards: IP 67
• Temperature, Operating: -40 to +85 °C
• Termination: Quick Connect
• Voltage, Rating: 30VDC; 250VAC
• Contact Configuration: DPST
• Operating Force: 10N
• Contact Voltage Ac Max: 250V
• Contact Voltage Dc Max: 125V
• Contact Current Max: 12A
• Actuator / Cap Color: Natural
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 486-1438

SCHURTER GmbH
D – 79346 Endingen
www.schurter.com
4
Legend
13 of 16
4.1
page
I
II
III
IV
V
ASSEMBLY
Installation
issue date:
04.08.2007
= Housing Assembly
= Flat Pin Terminals (illumination)
= Gasket
= Screw Nut
= Push Button Switch Assembly
created by:
Mangold
Changes that contribute to technical improvement are subject to alternations
amendment date:
07.12.2010
released by:
Schillak
Installation instruction
Installation information:
1. Place the gasket accurately on the actuator
2. Tighten the screw nut with the torque
3. Clasp the push button switch assembly into
1. The power supply and the configuration of
2. Insulate the terminals as required
3. Installation instructions according to VDE-
housing. Then mount the actuator
housing assembly into the panel.
instructions according to
the actuator housing.
the flat pin terminals has to be installed
correctly for the illumination and push
button switch function.
standard DIN VDE 0100-100 or
alternatively IEC 60354 standard
amendment no.: datasheet no.:
10321
105.9526.200
Print date: 10/12/2010 14:40:00
Chapter 2.4
index
h