A3GT-99C1-H1NG Omron, A3GT-99C1-H1NG Datasheet - Page 16

• Manufacturer Part Number: A3GT-99C1-H1NG
• Description: SWITCH DPDT PB ILLUM GREEN
• Manufacturer: Omron
• Series: A3Gr
• Type: Illuminatedr

Specifications of A3GT-99C1-H1NG

• Circuit: DPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 5A @ 125VAC
• Actuator Type: Round Button
• Illumination Type, Color: Neon, Green
• Illumination Voltage (nominal): 110 VAC
• Mounting Type: Panel Mount
• Termination Style: Screw Terminal
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A3GT99C1H1NG; SW161

16
A3G
Assembly/Disassembly
Mounting directions of the LED/lamp for the pushbutton unit
(1) For the lighted type switch:
Note: Push the LED/lamp projections into the base groove. The LED/lamp is flexibly mounted when used for illumination and is rigidly
Removing lamp from the pushbutton unit
Position the functional unit as shown in (1). Press down on the
LED/lamp angling it in the direction indicated by A. Side B of the
LED/lamp disconnects and side C angles away from the
pushbutton unit so that it looks like (2). Turn the LED/lamp in the
direction indicated by D. The LED/lamp projections (2 locations)
will disconnect from the LED/lamp groove so that it looks like (3).
Pull in the E direction and remove the LED/lamp.
Mounting directions for the pushbutton unit and the switch unit
Insert the LED/lamp unit into the aperature of the switch unit with the LED/lamp
unit's guide facing the side of the aperature mouth that does not have the two
projections. The pressure applied during insertion should be 2.5 kg min.
Note: Since the mounting directions of the pushbutton unit are the opposite for
Removing the pushbutton unit
Pull the cap of the functional unit while holding the recessed guide
on both sides.
Note: Do not use radio pliers to remove the cap as they may cause damage.
Fit the LED/lamp so that its guide projection is inserted into
the wider opening in the receptacle of the pushbutton unit.
MOUNTING AND REPLACING THE OPERATING SECTION
mounted when used for indicators.
the lighted type switch and the indicator application, pay special attention
to the direction of the legend plate.
LED/Lamp guide
LED/Lamp guide
(1)
(2)
(2) For the indicator:
Insert the LED/lamp guide into the narrower opening
in the indicator's receptacle.
Functional unit
C
B
LED/lamp
Recessed guide
A
D
Projections of the switch unit
Face the guide of the LED/lamp unit toward
the side without the projections
Projections on the LED/lamp
Groove in the indicator
(4)
(3)
LED/lamp projections
disconnected from
the grooves
LED/Lamp guide
E
A3G