11136AD2 APEM Components, 11136AD2 Datasheet - Page 9

• Manufacturer Part Number: 11136AD2
• Description: SWITCH TOGGLE PROFES
• Manufacturer: APEM Components
• Series: 11000r

Specifications of 11136AD2

• Circuit: SPDT
• Switch Function: On-On
• Contact Rating @ Voltage: 4A @ 125VAC
• Actuator Type: Standard Round
• Actuator Length: 11.30mm
• Illumination: Non-Illuminated
• Mounting Type: Panel Mount
• Termination Style: Solder Lug
• Bushing Thread: 1/4-40
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

APEM
Dimensions : first dimensions are in mm while inches are shown as bracketted numbers.
• Max. current/voltage rating with resistive load :
• Minimum load : AD2-X780-D contacts : 10mA 50mV, 10µA 5V min.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
• Contact bounce : 2 ms max.
• Electrical life at full load :
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts
• Terminal seal : epoxy
Note : AD2 and X780 contacts
can be used for high level
applications. In this case, the
gold layer is considered only as
a protection against oxidation
during storage.
Tin dipped terminals available,
see "Special options".
A : silver
AD2 : gold plated silver
(2 microns gold)
X780 : solid rivet - gold plated
silver/nickel alloy
D : solid gold rivet
X910 : silver/nickel alloy (for
peak currents, see “Special
options”)
- silver contacts (A-AD2-X780) : 2A 250VAC - 4A 125VAC - 4A 30VDC
- gold contacts (D) : 200mA 250VAC - 400mA 125VAC
1.000 Vrms 50 Hz min. between terminals
2.000 Vrms 50 Hz min. between poles and between terminals and frame
Contacts
A
AD2
X780
D
Packaging unit : 2 pole models : 25 pieces - 3 & 4 pole models : 20 pieces.
MATERIALS
Max. current/voltage rating
2A 250VAC - 4A 125VAC - 4A 30VDC
2A 250VAC - 4A 125 VAC - 4A 30VDC
(Gold plating : 100mA 30VDC max.)
200mA 250VAC - 400mA 125VAC
Low level or mechanical life
Professional toggle switches - threaded bushing ø 11.9 (15/32)
• Torque :1,50 Nm (1.10 Ft.lb) max. applied between the 2 nuts
• Standard panel thickness : 4,5 mm (.177) max.
• Operating temperature : -40°C to +85°C
Upon request, each individual switch can be submitted to a low level run-in
test of 50 or 250 cycles to ensure suitability for special applications requiring
a very high level of reliability (military, space, etc.).
QPL (Europe only)
MUAHAG
Designed to MIL specifications
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, complete appropriate box of
ordering format. Preferential lists do not appear on the switches.
ELECTRICAL SPECIFICATIONS
CECC 96201-005
CECC 96201-008
www.apem.com
12000 series
AGENCY APPROVALS
RELIABILITY
GENERAL SPECIFICATIONS
2 positions
150.000
50.000
20.000
80.000
Peak currents, refer to “Special options”.
-
/
RUN
PREFERENTIAL LISTS
Number of cycles
-
IN TEST
3 positions
100.000
50.000
20.000
50.000
Specifications
A-71
A