TTL-232R-3V3-2MM FTDI, Future Technology Devices International Ltd, TTL-232R-3V3-2MM Datasheet - Page 23

• Manufacturer Part Number: TTL-232R-3V3-2MM
• Description: MODULE USB - RS232 WITH CABLE
• Manufacturer: FTDI, Future Technology Devices International Ltd
• Series: USBmadeEZ-UARTr

Specifications of TTL-232R-3V3-2MM

• Usage: USB to TTL Serial 3.3V
• Convert From (adapter End): USB - A, Plug
• Convert To (adapter End): Rectangular Connector, Female Sockets, 8 pos (7 open), 2mm
• Length: 5.90' (1.80m)
• Shielding: Unshielded
• Color: Black
• Connector Type: Rectangular 8 pos Plug (7 open) to USB A Male Plug
• Cable Type: Round
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 768-1095

Appendix A - Cable EEPROM Configuration
Each TTL-232R cable is controlled by the FTDI FT232R IC. This FT232R device contains an EEPROM which
contains the USB configuration descriptors for that device. When the cable is plugged into a PC or a USB
reset is performed, the PC will read these descriptors. The default values stored into the internal EEPROM
are defined in Table 0.1
Parameter
USB Vendor ID (VID)
USB Product UD (PID)
Serial Number Enabled?
Serial Number
Pull down I/O Pins in USB
Suspend
Manufacturer Name
Product Description
Max Bus Power Current
Power Source
Device Type
USB Version
Remote Wake Up
High Current I/Os
Load VCP Driver
Invert TXD
Invert RXD
Invert RTS#
Invert CTS#
Table 0.1 Default Internal EEPROM Configuration
Copyright © 2010 Future Technology Devices International Limited
TTL-232R
Bus Powered
See Note
See note
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Enabled
Enabled
FT232R
0403h
6001h
90mA
Value
0200
FTDI
TTL TO USB SERIAL CONVERTER RANGE OF CABLES Datasheet Version 2.02
Yes
FTDI default VID (hex)
FTDI default PID (hex)
A unique serial number is generated and programmed into
the EEPROM during device final test.
Enabling this option will make the device pull down on the
UART interface lines when the power is shut off (PWREN#
is high).
Product description depends on the cable. The following
lists the Product description for each different cable.
TTL-232R-5V
TTL-232R-3V3
TTL-232R-5V-AJ
TTL-232R-AJ-3V3
TTL-232R-5V-WE
TTL-232R-3V3-WE
TTL-232R-3V3-2mm = USB <-> Serial Cable
Returns USB 2.0 device description to the host.
Note: The device is be a USB 2.0 Full Speed device
(12Mb/s) as opposed to a USB 2.0 High Speed device
(480Mb/s).
Enables the high drive level on the UART and CBUS I/O
pins.
Makes the device load the VCP driver interface for the
device.
Signal on this pin becomes TXD# if enable.
Signal on this pin becomes RXD# if enable.
Signal on this pin becomes RTS if enable.
Signal on this pin becomes CTS if enable.
Document Reference No.: FT_000054
Notes
Clearance No.: FTDI# 53
22