MT5656ZDX-V-GB/IE Multi-Tech Systems, MT5656ZDX-V-GB/IE Datasheet - Page 26

• Manufacturer Part Number: MT5656ZDX-V-GB/IE
• Description: MODEM V.92 DATA/FAX/VOICE BUNDLE
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® ZDXr

Specifications of MT5656ZDX-V-GB/IE

• Data Format: V.92
• Interface: RS-232
• Voltage - Supply: 9V
• Mounting Type: Desktop
• Package / Case: 5.7" L x 4.3" W x 1.0" H (145mm x 109mm x 25mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1135

Step 3: Download the Upgrade File
Step 4: Extract the Upgrade Files
Step 5: Upgrade the Modem’s Firmware
Before you begin the following procedure, read the README.TXT file extracted from the upgrade archive file.
Note the file name for the boot code (e.g., 2MBPFL1 1 .S37) and the file name for the new firmware (e.g.,
BkQg300G.hex).
Warning: Never install an older version of firmware over a newer version. Doing so will destroy the Flash
PROM! If the Flash PROM is destroyed, the modem must be sent in for repair.
Step 6: Restore Your Parameters
Your modem has been updated. You can now open your terminal program to reprogram your modem
parameters or to confirm the update by typing ATI3 in the terminal window and pressing Enter
Multi-Tech Systems, Inc. MT5656ZDX User Guide
1.
2.
3.
4.
5.
6.
1.
2.
3. In the same section of the Web page, download the Flash Wizard utility for your operating
1.
2.
3.
File list, and then click Next to continue.
Run Flash Wizard by double-clicking its icon or file name, or by selecting it from the Start menu. The
Identifying Devices dialog box is displayed as Flash Wizard locates and identifies the devices
connected to your system.
Note: If the message ERROR: No valid devices detected is displayed, verify that the device is
powered on and that all cables are correctly and securely attached.
Click the modem to be upgraded, and then click Next to proceed.
Select the port to be upgraded from the Port list, select the appropriate .HEX file from the Hex
Note: Do not use FLASHLDR.HEX. This file is used internally by Flash Wizard.
The Progress dialog box appears, showing a status bar that indicates the progress of the upgrade.
Caution:
become inoperable. Wait for the Next button to become active before proceeding.
When the flash upgrade is complete, the message Programming Complete appears. Click Next
to continue.
The Results dialog box appears next. Click Finish to exit Flash Wizard.
If you are not already at the MultiModemZDX firmware page of the Multi-Tech Web site, follow
the procedure in “Step 2: Identify the Current Firmware.”
Download the upgrade file for your modem by clicking its name, and save the file in a temporary
folder on your hard disk.
system by clicking it, and save it in the same folder.
Install the Flash Wizard utility by double-clicking the file name in Windows Explorer.
Extract the upgrade files by double-clicking the file name. The extracted files include a .HEX
file, which contains the upgrade data, and a Readme file.
Copy the upgrade .S37 file into the Flash Wizard folder, which, in a default installation, is at
C:\Program
Any disruption of the program during this stage of the upgrade can cause your modem to
Files\MultiTech Systems\Flash Wizard\.
Appendix C – Upgrading the Modem
.
26