XC2V80-5FG256I Xilinx Inc, XC2V80-5FG256I Datasheet - Page 96

• Manufacturer Part Number: XC2V80-5FG256I
• Description: IC FPGA VIRTEX-II 256FGBGA
• Manufacturer: Xilinx Inc
• Series: Virtex™-IIr

Specifications of XC2V80-5FG256I

• Number Of Labs/clbs: 128
• Total Ram Bits: 147456
• Number Of I /o: 120
• Number Of Gates: 80000
• Voltage - Supply: 1.425 V ~ 1.575 V
• Mounting Type: Surface Mount
• Operating Temperature: -40°C ~ 100°C
• Package / Case: 256-BGA
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Logic Elements/cells: -

Table 4: Virtex-II Pin Definitions (Continued)
DS031-4 (v3.5) November 5, 2007
Product Specification
Notes:
1. All dedicated pins (JTAG and configuration) are powered by V
PROG_B
DONE
M2, M1, M0
HSWAP_EN
TCK
TDI
TDO
TMS
PWRDWN_B
Other Pins
DXN, DXP
V
RSVD
V
V
V
GND
BATT
CCO
CCAUX
CCINT
Pin Name
R
Input
Input/Output
Input
Input
Input
Input
Output
Input
N/A
Input
N/A
Input
Input
Input
Input
(unsupported)
Direction
Input
Active Low asynchronous reset to configuration logic. This pin has a permanent weak
pull-up resistor.
DONE is a bidirectional signal with an optional internal pull-up resistor. As an output,
this pin indicates completion of the configuration process. As an input, a Low level on
DONE can be configured to delay the start-up sequence.
Configuration mode selection.
Enable I/O pull-ups during configuration.
Boundary Scan Clock.
Boundary Scan Data Input.
Boundary Scan Data Output.
Boundary Scan Mode Select.
Active Low power-down pin (unsupported). Driving this pin Low can adversely affect
device operation and configuration. PWRDWN_B is internally pulled High, which is its
default state. It does not require an external pull-up.
Temperature-sensing diode pins (Anode: DXP, Cathode: DXN).
Decryptor key memory backup supply. Connect V
not used.
Reserved pin - do not connect.
Power-supply pins for the output drivers (per bank).
Power-supply pins for auxiliary circuits.
Power-supply pins for the internal core logic.
Ground.
www.xilinx.com
CCAUX
(independent of the bank V
Description
Virtex-II Platform FPGAs: Pinout Information
BATT
CCO
to V
voltage).
CCAUX
or GND if battery is
Module 4 of 4
4